http://www.uprproducts.com/shopping/shopexd.asp?id=1079
this is one billet part i recommend you do not buy. i'm nearly insulted they expected me to drill holes into my existing speaker cover to slap on this poorly designed kit. the fit was horrible and required me to cut away pieces of plastic on the backside of the factory speaker cover to make room for the nuts included with the billet piece.
nevertheless, after finally getting them to fit i think it looks pretty good. thoughts? here are some pics detailing the billet piece...
this shows where i had to cut away plastic on the rim of the backside of the cover
this shows why i had to cut away areas of the plastic. it would be impossible to screw the nut on with the plastic still there. plastic had to be cut away at each screw to get the nuts on
there are 6 screws total—this shows one of the 2 spots where it actually says in the instructions that you will not be able to place a nut on...and it's obvious why
few shots of the billet piece on the speaker cover
interior view
driver's side door view
silverhorse honeycomb panel that has nothing to do with the billet speaker covers, but thought i'd show anyway since i just put it on
this is one billet part i recommend you do not buy. i'm nearly insulted they expected me to drill holes into my existing speaker cover to slap on this poorly designed kit. the fit was horrible and required me to cut away pieces of plastic on the backside of the factory speaker cover to make room for the nuts included with the billet piece.
nevertheless, after finally getting them to fit i think it looks pretty good. thoughts? here are some pics detailing the billet piece...
this shows where i had to cut away plastic on the rim of the backside of the cover
this shows why i had to cut away areas of the plastic. it would be impossible to screw the nut on with the plastic still there. plastic had to be cut away at each screw to get the nuts on
there are 6 screws total—this shows one of the 2 spots where it actually says in the instructions that you will not be able to place a nut on...and it's obvious why
few shots of the billet piece on the speaker cover
interior view
driver's side door view
silverhorse honeycomb panel that has nothing to do with the billet speaker covers, but thought i'd show anyway since i just put it on