bleeding for the ones that are home alone

boondocksaint · Sep 1, 2003

ok, got the new wheel cylinder on,new mc on, and im ready to bleed. is there a way i can do this by myself short of putting a 45lb dumbbell on the pedal and bleeding them that way. im by myself and would like to know if there is another procedure. if there isnt then ill do the dumbbell trick. i think i read that it can be done. also when i bleed the lines do i open the mc or keep it closed? i would assume closed because i would believe that air can still get in through the open mc. thanks in advance

Platonic Solid · Sep 1, 2003

If you had a pressure bleeder (forces brake fluid under pressure into the master cylinder), you could do it alone, but then you wouldn’t have asked the question.

If you had speed bleeder valves (bleeder screws that have internal check valve), you could do it alone, (though you’d be hard pressed to see air bubbles coming out of a hose on the rear passenger side while you’re stepping on the brakes) but then you still wouldn’t have asked the question.

If you have beer, grab a neighbor.

I always leave the master cylinder lid on when bleeding brakes.

WORTH · Sep 1, 2003

you can gravity bleed them, some cars bleed easier than others with this method. Just fill the master, leave the top off, and open a bleeder until it is all fluid , then go to the next. I usually start with the closest first when i gravity bleed, seems to go faster. frt/left, frt/right, rear/left, rear/right

Ozsum67 · Sep 1, 2003

Worth is correct, but it is time consuming. I used this method when replacing fluid in my hydrolic clutch of the F150.

boondocksaint · Sep 1, 2003

flagged the guy grading the dirt road and paid him 10 bucks to hold the pedal,1/2 hour later i have awesome braking power(and i didnt even use a tube and jar)but will invest in some speed bleeders, anyone know where to get them at? i.e local? or order? thanks for the input

paintballtommy · Aug 14, 2004

kragens has them

Ozsum2 · Aug 14, 2004

My word, this thread got pulled out of moth balls. I wonder if he is still waiting for the answer?

2nd Mustang · Aug 14, 2004

I copied someone's design and made a pressure bleeder that pressurizes the MC with a garden sprayer. Don't forget to bench bleed the MC first.

bleeding for the ones that are home alone

boondocksaint

New Member

Platonic Solid

WORTH

Ozsum67

Too much thin air

boondocksaint

New Member

paintballtommy

Member

Ozsum2

New Member

2nd Mustang

Similar threads

bleeding for the ones that are home alone

New Member

Too much thin air

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency