BLOWN 347 progress thread

BLOWN347STROKER · Jun 21, 2010

[/IMG]

[/IMG]

I now have the 10 point roll cage ordered and its on its way. I get to start mocking it up very soon. I also got a built c4 transmission with the car supposedly built to handle 1400 hp but I am going to have a trans shop take it apart and make sure before i go and bolt it up to my motor. I also have a built 8.8 that is going under it after it gets heavily modified with braces and the tubes get welded up. More pics to come soon.

Cobra912 · Jun 21, 2010

looks like a solid good start. I think it's a much better idea. keep us posted!

BLOWN347STROKER · Jun 22, 2010

So I spent some more time working on the car last night. I found out whoever painted this last and shot the primer on it never took off the side scoops, side skirts, or any other moldings for that matter so needless to say the quality isn't very good. I got the fenders off and sprayed the engine bay down to remove alot of the dirt and grime that was under the fenders and in the strut tower area. I got the dash removed and the wiring behind the dash removed. Tonight I am going to finish stripping the inside of the car and start getting rid of all unnecessary wiring and the abs module. I don't really need that on this car.

[/IMG]

BLOWN347STROKER · Jun 29, 2010

Yesterday I got my roll cage in. It looks to be a good quality cage. Now comes the custom fabrication to stiffen the chassis and rear suspension to be able to handle the amount of horsepower I am going to be putting down.

[/IMG]

BLOWN347STROKER · Jun 29, 2010

Here are some pics of the rest of the engine bay cleaned out and the interior finished and stripped out.

[/IMG]

90lxcoupe · Jun 29, 2010

are you doing thru the floor subframes?

BLOWN347STROKER · Jun 29, 2010

Yeah I am going to be doing something similar to these photos. I have been doing alot of searching online on what would be the strongest to prevent chassis twist and here are some pics. Alright It took me almost an hour to find these pics again but here is a link to a car that was done very nice. My setup will be very comparable to these pics.

WIKDLXII-Chassis & Fabrication

As well as these pics. I am sure alot of you have followed this thread as well. I am just astounded at all of the work that has come out of this car. It looks amazing as i am sure most of you will agree. I am pulling alot of my ideas from both of these amazing cars.

http://www.stangnet.com/mustang-forums/772468-started-84-t-top-coupe.html

Cobra912 · Jun 29, 2010

where's the cage from? looks good. You still going carb? What's the set-up?

BLOWN347STROKER · Jun 29, 2010

I got the cage from this place.

Roll Bars/Cages

So far so good. It looks good so far. i hope to get it in in the next week or so so I can start working on getting the interior back in it. I am going carb setup.

The current setup which I think I have finally made up my mind on is going to be a dart 351w based motor stroked to a 454 with some afr 225cc heads and 72cc combustion chambers with a teflon stripped 671 blower pushing about 18 lbs of boost. I talked to the machine shop that is going to be building my motor and they said 1000hp at the rear wheels is easily gonna be obtainable by this setup. I will not stop until it has at least that much at the rear wheels.

90lxcoupe · Jun 29, 2010

those 6-71's arent the most efficient things, you should look for a F-1c or F-1r procharger, that will get you in the 8s no prob

smokin joe · Jun 30, 2010

Did you put your 95 back together the way it was? The paint job on that car is sweet.

BLOWN347STROKER · Jun 30, 2010

Since I am putting a big blower on this car I am putting it back together just not the same as it was. The body is still all together on it. I just have to put a motor and transmission in it. I was thinking like a TKO 500 and a mild 351w build. Hopefully pushing about 400. I want to be able to drive it more often than I did. And since the other motor is going to be a gas guzzler I figured I would make that. one a little more fun to drive. I will take pics of the garage today and post them. Its filled with mustangs and parts.

SScott · Jun 30, 2010

I look forward to seeing what you do. Are you keeping the Telstars? IMHO they look really good!

BLOWN347STROKER · Jul 1, 2010

Here are some pics of the garage and the project cars. I find it funny that 90% of the stuff in my garage is all mustang related in some way.

[/IMG]

Cobra912 · Jul 1, 2010

wow I can hardly stayed focused on one project. Looks like fun.

I'm a little confused with exactly your plans are for each car. What's the time frame for both?

BLOWN347STROKER · Jul 1, 2010

Red and black car is going to be done hopefully late august. Motor is being built. Its a 97 cobra. Going to be a 357 stroker with a 250 shot on it. the red white and blue car will hopefully be done later this year. And the street machine project will hopefully be done somewhere around this time next year. So im gonna be busy.

Cobra912 · Jul 1, 2010

nice. your gonna have to rob a bank to fund your projects! Anyways I like the new car, keep the wheels, it makes a nice drag look.

BLOWN347STROKER · Sep 22, 2010

Its been a while since I have done any updates on the builds. I bought my first home and between the remodel and all the little things that now have to be done it doesn't leave me much time for my projects. Well now that I am finally getting some time freed up I have for sure decided which way I am going to go to put my first car back together. I picked up a 2002 gt with what was supposed to be some small motor problems for a good price but turned out to be more. Oh well gonna get it fixed and move on. Here is the thread I started explaining that.

http://www.stangnet.com/mustang-forums/824015-good-find-big-dissapointment.html#post8295904

I also have a big list of parts for it collected already including 42# injectors, professional products upper plenum and throttle body, C&L intake, pypes long tube headers, off road x pipe, mac mufflers, I have an IRS setup going in the car with upgraded diff and braces with 3.55 gears, roush performance guage cluster, polyurethane motor and transmission mounts, and a 150 shot of nitrous with what is surely more to come. I know I have to get a new clutch and I am putting in adjustable cam gears since the motor I have already has cams, and patriot performance valve spring upgrade, a SLP line lock kit and more. Pics will be up in the next day or two.

Shaolin Crane · Sep 22, 2010

gawd i love that car, perfectly done red, white and blue paint

BLOWN347STROKER · Sep 29, 2010

Ok so finally making some headway on the project car. Here is how she sits now all covered in dust. I picked up a few more parts for it. Here are some pics.

[/IMG]

[/IMG]

Here is the latest edition to my parts collection. I decided since I was just going to make this a driver car and not try and go all out on speed that I wanted a little smooter ride and opted for an irs setup for the rear.

[/IMG]

BLOWN 347 progress thread

BLOWN347STROKER

Member

Cobra912

Active Member

BLOWN347STROKER

Member

BLOWN347STROKER

Member

BLOWN347STROKER

Member

90lxcoupe

BLOWN347STROKER

Member

Cobra912

Active Member

BLOWN347STROKER

Member

90lxcoupe

smokin joe

BLOWN347STROKER

Member

SScott

Powered by LORD

BLOWN347STROKER

Member

Cobra912

Active Member

BLOWN347STROKER

Member

Cobra912

Active Member

BLOWN347STROKER

Member

Shaolin Crane

Banned

BLOWN347STROKER

Member

Similar threads

BLOWN 347 progress thread

Member

Active Member

Member

Member

Member

Member

Active Member

Member

Member

Powered by LORD

Member

Active Member

Member

Active Member

Member

Banned

Member

Similar threads

Privacy & Transparency

Privacy & Transparency