Heres a long one......two options.
If your existing paint is nice and you just have a couple dings, I would call a paintless dent guy with a good rep. I had a black 97 Cobra, never painted.....
4 dings in driver door
1 HUGE dent in the passenger door and 3 dings
2 dings in left quarter
2 dings in right quarter
I waited 1 month for this "reputable" dent guy to come out. WORTH THE WAIT. I paid him 200 dollars for about 2-1/2 hours of work. He worked most of that time on the HUGE dent. The others were a matter of minutes. You could not even see where the dings were. When I sold that car...the guy who bought it was like..."There is not a ding in this car!!" I said "I know....

"
However, I have seen cars where some dent guy worked on it, and a small ding wasn't all they way out, and it had 7-8 prick marks in it. SO....do some research before calling the first guy in the phone book.
If you absolutley must paint it, bondo it...etc.. With small dings, I hit the spot with 80 or 120 grit and use a small filling putty. There is no need to grind it down with 24 or 36 grit and use bondo unless it is a large dent that needs hours of blocking and priming.
To finish sand everything, I hit the car with a DA and 320 or 400 grit. If it is a metallic color or a black car I am refinishing, I always wet sand it with 600 and then 800 grit after I finish sand it. After paint and clear...I hit it with 1500 and 200 grit wet sand paper and rub it out....looks PERFECTLY FLAT!!