Borla Exhaust

Disturbed One · Aug 10, 2005

I have a 97 mustang GT and the seams on the factory mufflers are starting to come apart slowly but surely. I was looking at the borla catback for my car along with a matching off-road pipe. I believe the boral is a straight through muffler design.

I've read that an o/r x-pipe works/sounds best with a straight through muffler while an o/r h pipe sounds best with a chambered muffler. I've also read that some o/r x pipes sound nice with the flowmaster 2-3 chambered mufflers? I like the mellow tone of the borla and the way it sounds at WOT. I've though about getting a matching bassani o/r x pipe. Anyone know if there'd be any drone or have any suggestions to go with the borla? Everyone has flowmaster in this town and I want something else to be a little different and don't want the drone that I hear people talk about. I want something that's mellow for driving but sounds kind of throaty at WOT.

I was also wondering if anyone knows if a 17x10.5 will fit on the rear with the borla catback? I thought about originally going bassani but I've heard you can fit anything wider then stock without having to knick the exhaust to fit it. I've asked a few questions in here hoping someone can get a good reply or info for the help.

BooWFO · Aug 10, 2005

I got a borla catback (mainly cause I got a steal of a deal) with a mac prochamber. It has a very different sound. The prochamber gives it a little more Rumble IMO but it does pick up a drone. Of course the borla is loud anyways. I'm pretty sure the straight through you are talking about is the Stinger which with an offroad h is obnixously loud IMO.
Tire Fitment not sure I know the guy I got my borla catback from runs 18x10's with the one I have and with the new stinger he got. However it looks like it would hit if I tried on mine. If you go over to gotstang.com 1tufgt is running 18x10's in the rear with borla. Hope this helps.

Disturbed One · Aug 10, 2005

it helps out a little bit to see what might work and what might not. On the borla website for my car. It's Part # 14624.
http://www.borla.com/applications/lookup.aspx/1997/Ford/Mustang/GTStainless_Steel_Cat-Back_System/14624/

Stainless Steel Cat-Back™ System
BORLA Cat-Back™ exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

It says a straight though multi core? Would that be a chambered exhaust that's more straight through then anything or??? I'm still learning what I can and getting there slowly but surely.

Disturbed One · Aug 10, 2005

what type of prochamber do you have for your setup if there is more then one?

DropTopPony · Aug 10, 2005

i have the borla cat back on my 96 with a bassani X with cats. It sounds great. Not too loud when local cruising and loud enough when you get on it. I've been complimented by many including old guys with muscle cars. I have 90,000 miles and 9 yrs of use on the catback and its still good as new. Wow they cost over 700 now...I paid @400.

BooWFO · Aug 11, 2005

I've got the OR prochamber, had that on with stock cat(less) back. Then I picked up the Borla catback from a local guy. Not sure they used to list them as borla and then borla "stinger". The Stinger's are the straight through loud as heck hurt your ears they are also more $$.

white-04 · Aug 11, 2005

I got the Borla Pro XS mufflers welded in to my stock pipes. Sounds good with my catted MRT H. Stingers might be obnoxious, but the Borla Pro XS is not. My wife and 3-year old ride with me to work a couple times a week and they do not complain. Cruising at 65 with stock gears, it is almost as quiet as stock exhaust inside the cabin. But when going through the gears, quiet it is not. I got the mufflers ($70 each) and had them welded for $112, about $250 total. As long as your pipes are in good shape, you might want to save some coin. I bought them through Wickednicky.com and would do it again.

Disturbed One · Aug 11, 2005

Do you think the that borla cat-back, that's not the stinger right? would sound fine with the bassani o/r X pipe? Like no major drone?

BooWFO · Aug 11, 2005

The Mufflers them selfs don't seem to suffer Drone. I get it from the prochamber. Then again I only have like 3 bills in my whole system so I cann't complain too much. hehehehe

harley02 · Aug 11, 2005

I have the Borla catback on my 95 and I dont like it because it's not Flowmaster. When the funds become available I'll be selling the catback system for $200. New its $600. Trying to get back to MAC LT's w/pro chamber H and FM catback.
Everyone I hang out with says the Borla sounds good from the outside when really getting on it, but I dont particularly care for it.

DropTopPony · Aug 11, 2005

harley02 said:
I have the Borla catback on my 95 and I dont like it because it's not Flowmaster. When the funds become available I'll be selling the catback system for $200. New its $600. Trying to get back to MAC LT's w/pro chamber H and FM catback.
Everyone I hang out with says the Borla sounds good from the outside when really getting on it, but I dont particularly care for it.

your selling your borla so you can get flowmaster? talk about taking a step back! But if you like DroneMasters its your car.

JimTMich · Aug 19, 2005

I've got 10.5x17 with 315 35's and a borla stinger catback. supposedly it clears. If I look on the exhaust, there is a slight rub mark thought. My car has c springs though....

::Jongo:: · Aug 20, 2005

Disturbed one: I run 315/17's witht he Borla Stinger cat back with no issues.
Your also asking about a smooth sounding exhaust thats loud as well. If you put an Off road X or H pipe on your car.... its not going to be smooth. Stick with a mid-pipe with cats, the cats will smooth out the exhaust.

Disturbed One · Aug 20, 2005

::Jongo:: said:
Disturbed one: I run 315/17's witht he Borla Stinger cat back with no issues.
Your also asking about a smooth sounding exhaust thats loud as well. If you put an Off road X or H pipe on your car.... its not going to be smooth. Stick with a mid-pipe with cats, the cats will smooth out the exhaust.

It looks like the borla stinger exhaust is only for 99+ cars.....

As for being smooth... I guess I'm mainly looking for is something that doesn't sound really raspy and have a bad drone to it. I'm wanting to lose the stock midpipe at somepoint and was looking to see what might sounds nice with the borla. The JBA stuff sounded pretty nice also.

green_fow_six · Aug 21, 2005

Disturbed One said:
It looks like the borla stinger exhaust is only for 99+ cars.....

As for being smooth... I guess I'm mainly looking for is something that doesn't sound really raspy and have a bad drone to it. I'm wanting to lose the stock midpipe at somepoint and was looking to see what might sounds nice with the borla. The JBA stuff sounded pretty nice also.

I ran, the borla catback w/bassani O/R X for a few years. Sounded awesome, If I remember, It had a little bit of drone right at 2K rpms but it didn't sound bad too me. Always got compliments. Then I had to weld cats on the O/R bassani pipe to pass emmisions. It quieted it down quite a bit, but still had a nice tone. Since then I added an O/R SLP X with interchangable Cat's or Straight Pipes. WOT is just ridiculously loud now but me likey!!

BTW, if you don't want something real raspy and very loud, take Jongo's advice and get a catted X.

csledd · Aug 21, 2005

I have the Steeda Cat-back (Borla) with SLP O/R X-pipe and the SLP LT's. I hear that it sounds good all the time, from domestics and import drivers. I'll tell you what though, I also hear that it's not very loud until WOT. Which is fine by me. It's loud enough just driving around. I like the sound because it doesn't sound like I just cut off the pipes like a lot of domestic people do.

here's a clip
http://www.csledd.com/ellie/exhaust/new-exhaust2.wmv
http://www.csledd.com/ellie/exhaust/new-exhaust3.wmv

prsrizdgt · Aug 21, 2005

Another vote for Bassani X and Borla Catback. Mine is catted. Excellent quality.

Borla Exhaust

Disturbed One

New Member

BooWFO

New Member

Disturbed One

New Member

Disturbed One

New Member

DropTopPony

Noob Slayer

BooWFO

New Member

white-04

New Member

Disturbed One

New Member

BooWFO

New Member

harley02

New Member

DropTopPony

Noob Slayer

JimTMich

Member

::Jongo::

New Member

Disturbed One

New Member

green_fow_six

csledd

Official Ovary Punching Member

prsrizdgt

New Member

Similar threads

Borla Exhaust

New Member

New Member

New Member

New Member

Noob Slayer

New Member

New Member

New Member

New Member

New Member

Noob Slayer

Member

New Member

New Member

Official Ovary Punching Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency