Both door handles broke!

L

LS14Winter

New Member

Apr 10, 2005

1

0

0

Feb 11, 2008

#1

• Feb 11, 2008

• #1

I got a 92 lx 5.0 convertible a few weeks ago. One door handle was on its way out and the other is already broke. I ordered new door handles from 50resto.com but when my buddy went to move the car into the polebarn the door handle broke completely. With both doors closed and windows up is the best way to get into the car now by cutting the white top off? :-(

Any suggestions appreciated...

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Feb 11, 2008

#2

• Feb 11, 2008

• #2

Don't break the 1/4 window, it's the most expensive!

The only suggestion I can offer is to pry out the door window and try to get something to catch the inside handle.

 

L

LS14Winter

New Member

Apr 10, 2005

1

0

0

Feb 11, 2008

#3

• Feb 11, 2008

• #3

I saw that I could buy a new convertible top for $150, but they sound like a PITA to install... ill try to get in it tonight

 

marine_2003

Member

Jun 6, 2005

427

0

16

Lake County, FL

Feb 11, 2008

#4

• Feb 11, 2008

• #4

i dont have a vert but i have a coupe, and i dont know, but could you get in through the trunk? just push the beatseat out and go in. just a suggestion. i can do it in the coupe, but i dont know about a vert.

 

98E9GT

New Member

Dec 16, 2007

110

0

0

Feb 11, 2008

#5

• Feb 11, 2008

• #5

Power locks? my 89 coupe had em. Anyways i locked my keys in my 94 conv and i just took a wedge and put it in the back side of the driver side window, and took a small rod and hit the unlock button.

 

L

LS14Winter

New Member

Apr 10, 2005

1

0

0

Feb 11, 2008

#6

• Feb 11, 2008

• #6

the trunk is TINY because its convertible, but ill check that out. the doors arent locked but the handles are broken.

 

SteedaGT9150

Advanced Member

Nov 10, 2004

1,351

59

68

Maryland

Feb 11, 2008

#7

• Feb 11, 2008

• #7

cant u do something with a screw driver and put it somewhere by the handle and it will open?

 

LiquidGT

Member

Oct 8, 2007

368

0

16

Near STL hell

Feb 11, 2008

#8

• Feb 11, 2008

• #8

I'd get a locksmith first or try to stick a rod in to the power lock button. No power locks, try to slim jim it. Better than a new top or window.

I had my stang for four years and I never had the breaking door handle problem. Are you guys pulling on them real hard, I pull the handle till the door pops out at me then open it by the door frame.

 

9

91foxbod50

Member

Sep 26, 2007

486

0

16

Feb 11, 2008

#9

• Feb 11, 2008

• #9

my handles totally off my car, i stick my finger through the hole and push up on the bar..

They go because there made of cheap plastic, and where the handle sits on the shaft on the bracket, the spring usually is the first thing to go.. causeing a push and pull method to be used. but the wrong push and pull can end bad

bottom line, use some pinky power

 

bloopbloob

Member

Sep 27, 2006

578

4

16

Alberta

Feb 11, 2008

#10

• Feb 11, 2008

• #10

i've installed 3 door handles on mine so far. should be good now cuz i found metal ones. but the plastic ones are crap. and everyone has always had a hard time opening my doors. i think it's a poorly designed system.

 

Darkwriter77

Resident Ranting Negative Nancy

5 Year Member

Jul 1, 2005

314

281

134

Apache Junction, AZ

Feb 11, 2008

#11

• Feb 11, 2008

• #11

Even perfectly good metal door handles break, unfortunately. Frankenstang's dad managed to destroy a perfectly good metal handle on the driver's side of her notch - the door was locked and for some reason he thought it was just stuck, so he lifted up on it with BOTH hands.

The metal handle on my '86 isn't doing so well, either. Gonna probably replace it soon, too, as it's kinda floppy because the bushing of the handle's hinge towards the rear is kinda wallowed out.

 

G

GTOreturns

Well-Known Member

Oct 1, 2003

51

17

59

West Coast Best Coast

Feb 11, 2008

#12

• Feb 11, 2008

• #12

Buy a hatch!

 

Darkwriter77

Resident Ranting Negative Nancy

5 Year Member

Jul 1, 2005

314

281

134

Apache Junction, AZ

Feb 11, 2008

#13

• Feb 11, 2008

• #13

98E9GT said:

Power locks? my 89 coupe had em. Anyways i locked my keys in my 94 conv and i just took a wedge and put it in the back side of the driver side window, and took a small rod and hit the unlock button.

Click to expand...

I've re-read this like 5 times, and I'm still wondering ... how does this help a dude whose door HANDLES are broken on both sides? He's not locked out of the car, he just can't open the doors because there's nothing to open the doors WITH! (ACK! I just ended a sentence with a preposition! Bad, bad Grammar Nazi... )

 

ThePonyKid50

New Member

Mar 2, 2006

11

0

0

Ft. Laudy FL

Feb 11, 2008

#14

• Feb 11, 2008

• #14

in
for "how-to's" to fix door handles

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,016

1,613

194

NJ

Feb 11, 2008

#15

• Feb 11, 2008

• #15

bend up a metal rod, wedge the window, and open using the interior handle.
This happend to my buddies hatch, with the keys in the car, in front of my house.
If the keys weren't in the car we would of went through the hatch.
If you can find the right rod with good rigidity, you can reach across and open the p side door from the drivers side too.

I'd rather break pot metal handles than have the paint come off the metal ones.