my front calipers will not release pressure and are binding. my front brakes have been "upgraded" to power disks maybe 10 years ago with an unknown kit. problem is that the 2-bolt flange between the MC and the BB is different. the BB's flange studs are wider apart than the MC's holes by maybe a 1/4". the current MC's flange on one side has been horizontally cut-out only on one side to allow for the difference. the problem is that the misalignment from the center is causing a bind. any thought's on what year or model MC will work? short term i might have to cut out the other side too, but i would rather get a MC that fits. thanks in advance.