I need some advice on my brakes...I just put a new 306 in my 89 GT this weekend. My brakes were bad before the motor swap. They feel like I don't have enough pressure when I push on the pedal. Anyway, I thought my master cylinder was shot so I bought a new one. I bled all four really good, but I still don't have enough pressure when the pedal is pressed. I can pull the vacuum line off of the booster and feel vacuum. Do you guys think my booster is junk? Should I just try to re-bleed them again? Basically, my pedal never gets quite hard enough and you have to stomp them to stop. It is drivable but I'm going to let it sit until this is straightened out. Any help would be appreciated.