Brake Swap... Need help plz!

Look into the M-2300-M kit for the rear disks. It comes with everything you need minus the rear calipers for the back. It's about $175 for that kit. In addition to the kit, you'll need rear brake lines for a 94-95 Mustang (max motorsports sells a SS kit), 94-98 axles and the calipers.


Up front, 94-95 spindles are your best option. Dust sheilds don't matter since there is only 1 shield for all 94-04 Mustangs. If you go with SS lines get them for a Fox mustang. No adapter will be needed to adapt to the body lines but you may need to change the banjo bolts depending on if you have coarse or fine threaded calipers.

93 Cobra MC and booster seems to be the way to go these days. Also make sure you pick up an adjustable prop valve the the plug to gut the stock prop valve.

You'll also need 0.330" spacers for the fox balljoints unless you swap to SN95 balljoints.

For the e-brake, you'll need to modify the stock handle and need the following cables. Summit racing has them.

M-2809-A x 2
M-2810-A


Here are the directions:

http://www.fordracingparts.com/download/instructionsheets/FordInstShtM-2300-K.pdf

1st page has a parts list for you to check off


Have fun, it's not a difficult swap to do..just requires time to get all the parts.