• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Brake Vacuum With Boost?

  • Thread starter Thread starter Stevenmverrill
  • Start date Start date Nov 23, 2017

Stevenmverrill

5 Year Member
Oct 24, 2017
126
49
48
Nov 23, 2017
#1
  • Nov 23, 2017
  • #1
So I am putting a turbo on my sn95 this winter. The question is how to run the vacuum accessories, most importantly the brake booster?

From all the reading I have done no one seams to worry about it. But, I do plan to autocross, and run it on a track. Also, having had an 11 f150 turbo with a bad check valve (presumably) it's worth concern!

My best idea so far is to plumb it like the f150 with a check valve to manifold pressure, a 'T' and a check valve to prevent turbo intake, and also thinking to run a vacuum Reservoir ( junkyard cruise control part).

Interested in a good dialogue on the subject and what you are running. Or will the consensus be running a vacuum pump? Also A Venturi hose off the header has crossed my mind but doubt it would have much to offer?

Thanks for aNY input.
 

Adieu

Easy there, this ain't a dating site.
20+ Year Stangneter
Mar 7, 2002
9,531
5,187
224
Nov 23, 2017
#2
  • Nov 23, 2017
  • #2
You could grab an electric vacuum pump from a salvage yard off of either an 80s GM 4-banger car, or any of several diesels that use and electric vacuum pump to provide vacuum to the booster.
 
Reactions: Stevenmverrill

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Nov 23, 2017
#3
  • Nov 23, 2017
  • #3
I have a one way check valve in the line that goes to my booster. You are not on the throttle when you are on the brakes, so vacuum returns instantly as soon as you lift. You need the check valve to keep from pressurizing the booster.
 
You must log in or register to reply here.

Similar threads

Fox Brake pedal too stiff
  • keel
  • Sep 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
33
Views
962
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Wednesday at 9:17 AM
keel
Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
582
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
343
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
630
Fox 5.0 Mustang Tech Jun 21, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?