• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Brake warning light ON and OFF unexpectedly

  • Thread starter Thread starter PonyGTrider
  • Start date Start date Apr 24, 2023

PonyGTrider

5 Year Member
Feb 27, 2019
625
110
63
Mexico
Apr 24, 2023
#1
  • Apr 24, 2023
  • #1
Hi all,
I'm having a weird issue with my brake warning light.
I replaced the incandescent Illuminating light bulbs with LED's. I only replaced the 6 illuminating bulbs, now with the car parked E-brake ON and engine OFF I open the switch and no brake warning light shows on the dash, if I flip the parking lights ON the brakes warning light comes ON but if I release the E-brake handle the light stays ON. I don't have the stock E-brake handle, I replaced it with a newer adjustable one bot never had any issues before. Sometimes the brakes warning light stays OFF even after I flip the parking light ON, so there is too much inconsistencies... Where to focus my attention on to fix this issue?

Thank you all
 
A

adk

Member
Nov 18, 2022
9
10
13
Illinois
Apr 24, 2023
#2
  • Apr 24, 2023
  • #2
On some years the brake light doubles as a low brake fluid indicator. Just to rule it out, you may want to check your brake fluid.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,902
10,555
203
polk county florida
Apr 24, 2023
#3
  • Apr 24, 2023
  • #3
If the brake fluid is ok:
Flip the bulb. If no change install the stock bulb, check function.
 
Reactions: PonyGTrider

PonyGTrider

5 Year Member
Feb 27, 2019
625
110
63
Mexico
Apr 25, 2023
#4
  • Apr 25, 2023
  • #4
General karthief said:
If the brake fluid is ok:
Flip the bulb. If no change install the stock bulb, check function.
Click to expand...
Brake fluid level is right, all the warning lights still have incandescent bulb I replaced just the illuminating bulbs six of them with LED’s so no point on flipping that bulb.
That brake light just comes ON and OFF intermittently, also I noticed that if the light is OFF but I dimm the cluster lights all the way down I can see the brake light ON but really fainted. Weird stuff!!!

Thank you
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,249
17,932
224
Massachusetts
Apr 25, 2023
#5
  • Apr 25, 2023
  • #5
Is it an LED bulb? If so, it doesn't take much voltage to get it to blip for a second.

I swapped my cluster to LED's and my brake light comes on for a split second every time i open/close the door. I put an incandescent bulb in and it went away. Decided to put the LED back and just live with it.
 
Reactions: PonyGTrider

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,902
10,555
203
polk county florida
Apr 25, 2023
#6
  • Apr 25, 2023
  • #6
Is the switch at the brake lever connected? If it is then disconnect it and monitor light function.
 

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
5,856
3,987
183
Claremore, OK
Apr 25, 2023
#7
  • Apr 25, 2023
  • #7
Okay, so only the illumination in the cluster is LED and all the indicator lights are standard incandescent bulbs.

Any chance the printed circuit on the back of the cluster got damaged? I only say this as I pulled the cluster out of my Coupe and ended up damaging the circuit that over half the illumination bulbs are one. Was an idiot and did not function test it before I button everything back up and ended up right back in it to solder a jumper wire in to fix my dumbassery. Could be the wire in one of the plugs on the back of the cluster as well.

Is swapping the illumination bulbs out the only thing you have done to the car since this issue popped up? I believe that is the case but wanted to clarify.
 
Reactions: General karthief

PonyGTrider

5 Year Member
Feb 27, 2019
625
110
63
Mexico
Apr 25, 2023
#8
  • Apr 25, 2023
  • #8
Mustang5L5 said:
Is it an LED bulb? If so, it doesn't take much voltage to get it to blip for a second.

I swapped my cluster to LED's and my brake light comes on for a split second every time i open/close the door. I put an incandescent bulb in and it went away. Decided to put the LED back and just live with it.
Click to expand...
All the warning lights have regular incandescent bulbs. The illuminating lights (6) have LED bulbs…
 
You must log in or register to reply here.

Similar threads

Lighting issues
  • 87fbmustang
  • Apr 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
309
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 12, 2025
Noobz347
A
95 GT parking brake instrument cluster light trouble
  • Aroenias
  • Jun 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
236
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 24, 2025
Mustang5L5
A
Resolved Brake light switch
  • Alabama
  • Feb 24, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
3K
Fox 5.0 Mustang Tech Jun 25, 2026
General karthief
O
Getting things to work and display correctly on my cluster. I would appreciate anyone's two cent's worth.
  • OfflineHomestead
  • May 7, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
29
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2024
OfflineHomestead
O
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
611
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?