• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Brakes went out and the car died.

  • Thread starter Thread starter 4turboho
  • Start date Start date Mar 10, 2009
4

4turboho

New Member
Jan 31, 2009
119
0
0
Mar 10, 2009
#1
  • Mar 10, 2009
  • #1
I got a 91 mustang and since I bought the car its had a hissing sound when i hit the brakes.(at idle when i put my foot on the brake the rpms would go up) so I just put v8 brakes on it last week and tonight I was driving and I went to hit the brakesa and the pedal got super firm and as i continued to press the brakes harder cause the ebrake doesnt work I thought to my self maybe ill fix the ebrake tomorrow if i get this thing to stop lol...no no back to what happened I hit the brakes and as it was slowing down slowly the car died and now it wont start up. Is this the brake booster or something else?
 

capri debris

Member
May 5, 2007
289
6
18
PA
Mar 10, 2009
#2
  • Mar 10, 2009
  • #2
Hose from intake to booster keeps vacuum in the booster, if the booster housing leaks and lets air in, you will not have vacuum to assist stopping and also it will allow exrta air into the intake and it'll act like a vacuum leak and stall the engine. Sounds like you need a new booster and they are no fun to change.
 

stang&2Birds

Founding Member
May 4, 2000
2,091
5
58
New England. :-) CT/MA
Mar 10, 2009
#3
  • Mar 10, 2009
  • #3
Like capri debris said, check the vacuum line to the booster. Also, check the check-valve on the booster. You don't "need" the booster for the car to run or to stop. But, the brakes will be HARD to push. And, for MOST PEOPLE, the stopping distance will be GREATLY increased because of the additional force needed on the brake pedal. It will be UNSAFE to drive in heavy bumper-to-bumper traffic. Well, unless you have legs like Mr Universe.

BTW: For all of the *******s that have a desire to say "they could stop a car fine without the booster hooked up", I used to run up to 6 marathons a year and workout at a Gold's Gym 4x/week. Even in my best shape, stopping a car without a booster hooked up would NOT have been easy! Also, a non-working booster is different than a manual setup! The effort is greater.

Then again, a lard-*** that weighs 400+lbs might be able to put plenty of force on the brake pedal.

So, in short, fix the bad vaccum line and/or booster. Be safe, drive safe!

Good Luck!
 
4

4turboho

New Member
Jan 31, 2009
119
0
0
Mar 11, 2009
#4
  • Mar 11, 2009
  • #4
capri debris said:
Hose from intake to booster keeps vacuum in the booster, if the booster housing leaks and lets air in, you will not have vacuum to assist stopping and also it will allow exrta air into the intake and it'll act like a vacuum leak and stall the engine. Sounds like you need a new booster and they are no fun to change.
Click to expand...

I want a Mercury Capri!! After looking at you 2 cars I forgot what we were talking about lol Anyways thanks and ill check it all out
 
4

4turboho

New Member
Jan 31, 2009
119
0
0
Mar 11, 2009
#5
  • Mar 11, 2009
  • #5
ok the pedal is rock hard the check valve is good and i pluged the wire going to the booster and it still wont start i think its the timing belt skipped a tooth last night thats why it wont run but with the pedal being rock hard you think thats the booster or something else im kuntfused
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 11, 2009
#6
  • Mar 11, 2009
  • #6
No info about your car's engine, EFI or carb, no mods listed. Makes it hard to troubleshoot when we don't know what you have.

That's why it is a good idea to use the sig under the user control panel (User CP) option. It allows you to post your car year & mods, which help greatly when troubleshooting things. No, it is not there for us to snoop and see any "Secrets" you have hidden away under the hood. Be a good stangnetter and update you sig for future reference & don't keep us guessing.
 
4

4turboho

New Member
Jan 31, 2009
119
0
0
Mar 11, 2009
#7
  • Mar 11, 2009
  • #7
jrichker said:
No info about your car's engine, EFI or carb, no mods listed. Makes it hard to troubleshoot when we don't know what you have.

That's why it is a good idea to use the sig under the user control panel (User CP) option. It allows you to post your car year & mods, which help greatly when troubleshooting things. No, it is not there for us to snoop and see any "Secrets" you have hidden away under the hood. Be a good stangnetter and update you sig for future reference & don't keep us guessing.
Click to expand...

its just a stock 2.3l i know im in the wrong section but no one looks in that section haha!!
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Mar 11, 2009
#8
  • Mar 11, 2009
  • #8
Yes Capri's rule!
 
You must log in or register to reply here.

Similar threads

A
Resolved Brake light switch
  • Alabama
  • Feb 24, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
3K
Fox 5.0 Mustang Tech Jun 25, 2026
General karthief
F
Car dies on bumps and when braking
  • Feckl
  • Jul 14, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Jul 19, 2025
squeak93
1970 brake issue. Bad booster or?
  • All Stock93
  • May 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
10
Views
729
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2025
All Stock93
D
Brakes 1966 Mustang convertible 289, Auto - Disc brake conversion issues
  • DRGunn427
  • Feb 26, 2025
  • Classic Mustang Specific Tech
Replies
5
Views
686
Classic Mustang Specific Tech Jul 23, 2026
All Stock93
R
Brake Master Cylinder replacement steps for 2016 S550?
  • Reybeast
  • Dec 16, 2024
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
533
2015 - 2023 (S550) Mustang -General/Talk Dec 21, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?