Brakes

QU!CK

New Member
Apr 27, 2004
146
0
0
Charlotte, NC
A few weeks ago I noticed that my brakes were starting to squeal so I got some new pads to replace the old ones. I installed them last weekend and everything went smoothly but I noticed that they are still squealing for some reason?! :shrug:

Before I replaced them, pedal pressure just seemed like it took too much effort to bring the car to a halt under normal driving conditons and when I had to jump on them hard. I just guessed that it was because of the old pads but even after replacing them the pressure still feels nearly the same (bad).

I know these cars aren't exactly lightweights but, is this just a "normal" mustang quark or could I possibly have another issue buried somewhere?


-J
 
Did you turn the rotors and bleed the brakes? If not, I would recommend doing that along with cleaning the calipers and rotors with brake cleaner. Oh, did you use anti-squeal on the back of the pads?
 
Nater said:
Did you turn the rotors and bleed the brakes? If not, I would recommend doing that along with cleaning the calipers and rotors with brake cleaner. Oh, did you use anti-squeal on the back of the pads?
:stupid: No one ever changes their brake fluid... :notnice:
 
QU!CK said:
Nope, I didn't change the brake fluid nor turn the rotors. Could you please be a little more specific by "turn the rotors"? I'm guessing you mean rotate them?

Sorry, I'm a brake n00b :(


-J
If you rotate them, you'll end up with smaller rotors in the front and bigger ones in the back. :D So no that's not what you wanna do. What he meant was get the rotors resurfaced.