• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Broke the T-5

  • Thread starter Thread starter 90mustangGT
  • Start date Start date Aug 6, 2004
Prev
  • 1
  • 2
First Prev 2 of 2

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 7, 2004
#21
  • Aug 7, 2004
  • #21
T-5 Tear Down

Well I did a great job on it. The gears the connect the Input shaft with the Counter shaft have all thier teeth ground up. The thing is the rest of the gears look brand new. So I will need a new input an counter shaft. I don't know if I'm going to do this because the tech I work for said that that kind of damage is caused by the abuse and power I give it. I'll just end doing it again.

I'm going to look into my options.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 7, 2004
#22
  • Aug 7, 2004
  • #22
I looked up www.g-forcetransmissions.com and a complete kit with spur straight cut gears and dogrings cost $1700, and the same kit with syncs is only $1095, and if I send them my T-5 they will put either kit in for $250 which is a really good deal there. I guess they want to install thier own gears. For the trans alone it will cost between $1950 and $1345. Then I will have to call spec and see about a 26 spline clutch disc or if I can send them mine and have it converted.

There are several questions I still have so I plan to call them Monday morning. I don't know how I am going to afford this, maby get a second job, a loan, or a credit card and pay it off ASAP. I only want to do this once, and do it right. Oh well, life goes on.
 

Musclecarfan88

Member
Dec 30, 2002
184
0
16
Indianapolis, Indiana
Aug 7, 2004
#23
  • Aug 7, 2004
  • #23
whoa!!! i thought it was 950 for the whole kit?
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 7, 2004
#24
  • Aug 7, 2004
  • #24
Musclecarfan88 said:
whoa!!! i thought it was 950 for the whole kit?
Click to expand...

Maby a few places sells the kit cheaper, I don't know. Oh yeah, I didn't mentioned the mainshaft upgrade. If I can get the money, I'll probally go all out. I'm still looking into the TKO 500 option. I'll need a different bell but I'll be able to keep the same clutch disc. I'll just keep looking into it.
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 7, 2004
#25
  • Aug 7, 2004
  • #25
The T5's internals are 7-11lbs lighter than the TKO. Thats alot of rotating mass reduction.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 7, 2004
#26
  • Aug 7, 2004
  • #26
90mustangGT said:
I looked up www.g-forcetransmissions.com and a complete kit with spur straight cut gears and dogrings cost $1700, and the same kit with syncs is only $1095, and if I send them my T-5 they will put either kit in for $250 which is a really good deal there. I guess they want to install thier own gears. For the trans alone it will cost between $1950 and $1345. Then I will have to call spec and see about a 26 spline clutch disc or if I can send them mine and have it converted.

There are several questions I still have so I plan to call them Monday morning. I don't know how I am going to afford this, maby get a second job, a loan, or a credit card and pay it off ASAP. I only want to do this once, and do it right. Oh well, life goes on.
Click to expand...


First, talk to the guys who you plan on buying the tranny from. Most I see do NOT recommend the spec clutches. Supposidly they hit too hard and shock the drivetrain and can supposidly help break stuff. I'm looking at centerforce or mcleod with my tko.

Second, I too realized that buying a brand new tranny and going all out was too expensive. Could I afford it? yes. Was it worth it? No. I just sent the payment out to a dude on here for a very low mileage TKO with pro 50 shifter. Wasnt abused and had gm syncromesh fluid used with it. I saved about $600+ by buying used. Since money is tight for ya, consider buying a used 3550 or tko. Since you wanna reuse your current clutch, look for a 3550.

Mike
 

cobra dave

New Member
Sep 1, 2003
308
0
0
Aug 8, 2004
#27
  • Aug 8, 2004
  • #27
wtf are u kidding me the 3550 is discontinued?
 
E

E2ZZnic

New Member
Aug 4, 2004
4
0
0
Boise, Idaho
Aug 8, 2004
#28
  • Aug 8, 2004
  • #28
I've done several G-Force kits and other than the normal gear whine that comes with installing straight cut gears, they work great. One of these cars is running 10.30's with a 393 Windsor and full slicks.
If you're planning to drive this on the street, DO NOT GET THE DOG TOOTH SYNCHROS!!!!! The shift like ***** and have horrible street manners! They work fine on a race car that gets power shifted but thats all.
G-Force now has a case too, so I don't see where a lousy-shifting Tremec should even be an option.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 9, 2004
#29
  • Aug 9, 2004
  • #29
I was pretty confused for a while. The G-Force sounds great and maby I should have gone that way but I'm not regreting what I did. I just dug into savings and bought a Tremec TKO 500. I am sure this will last me a while.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 9, 2004
#30
  • Aug 9, 2004
  • #30
90mustangGT said:
I just dug into savings and bought a Tremec TKO 500. I am sure this will last me a while.
Click to expand...


Yeah, that should be a killer tranny! I hear ya, I too just dug $1100 out of my savings for my tko and pro 50. Did you get the 10 or the 26 spline input shaft? What clutch you gonna use? What bellhousing and are you gonna index it?

Mike
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
373
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
147
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
F
T5 transmission questions
  • Forddestroyer96
  • Aug 27, 2025
  • SN95 V6 Mustang Tech
Replies
0
Views
205
SN95 V6 Mustang Tech Aug 27, 2025
Forddestroyer96
F
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
305
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?