• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

broken water pump bolt help

  • Thread starter Thread starter bluidvl
  • Start date Start date Feb 3, 2006
B

bluidvl

New Member
Sep 18, 2005
63
0
0
delaware
Feb 3, 2006
#1
  • Feb 3, 2006
  • #1
ok bought a march pulley kit took off power steering pump and was bolting on bracket for idler pulley water pump was missing bolt.turns out bolt is broke in block .i can slide new bolt so far but not enough to catch threads what should i do help
 
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Feb 3, 2006
#2
  • Feb 3, 2006
  • #2
You'll need to tear it down and try to get the broken part out. Is it leaking coolant?
 

stangjunkie

New Member
Nov 15, 2004
381
0
0
Feb 3, 2006
#3
  • Feb 3, 2006
  • #3
bolt extractor to the rescue!!
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Feb 3, 2006
#4
  • Feb 3, 2006
  • #4
i would drill the center of the bolt out for a easy out. then i would make sure i got some sort of penitrating oil around the bolt threads. liquid wrench works very well. let that sit for a while . then before i went to use easy out i would heat area around bolt with heat. basically heat block up not the bolt. then use easy out to remove the bolt. hopfully this works for yah.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 4, 2006
#5
  • Feb 4, 2006
  • #5
Here’s the parts list for the broken water pump bolts. Not cheap, but it will get you fixed and back on the road…

A word about the links, if they don’t work, do a search on the part number (P/N). MSC updates their catalog regularly, and the pages may change, but the part numbers don’t. You will need the Adobe Acrobat viewer which is also a free download – http://www.adobe.com/products/acrobat/readstep2.html


http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=1096 Use drill bushing 5/16” OD, 5/32” ID, ¾” long, P/N 07010457, price $8.57 This centers the drill bit in the housing bolt hole so you don’t get off center and damage the water pump, timing cover housing or engine block


http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=27 drill bits - use 5/32” Cobalt/TiN coated bit. P/N 78530433, price $3.91

http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=1928 Screw/bolt extractors. Use EZY-OUT Screw Extractor P/N 63760037 Price $2.67


One step specialty item: See Drill-Out® Broken Bolt Extractors drill bushing, reverse twist drill & extractor all in one unit. Best to use when the bolt breaks off with the remaining part below the start of the threads. .P/N 05027164. Price $18.33 each. You MUST have a reversing drill motor (either air or electric) to use this bit. http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=19268

A long shank tap should be used to chase the leftover metal out of the original threads. Also recommended to clean the corrosion and dirt out of the threads before you reassemble everything. Cleaning the threads will help prevent the bolts from seizing next time (yes, there will be a next time).

Long shank 5/16” taps

http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=279 5/16” pulley tap, 6” shank P/N 04801189 price $14.26

OR second choice, will not clean all the bottom threads unless you grind the end of the tap.

http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=2798 extension tap, 6” reduced diameter shank P/N 04701181 $16.17

See http://www.windsorfox.com for Stainless Steel Water Pump Bolts with Custom stainless steel studs. Allow the use of factory accessory brackets without hunting for obsolete parts or using spacers.

Kit comes complete with nine polished stainless 12 point bolts, four stainless studs and nine stainless oversized washers.

Price: $65.95
 
B

bluidvl

New Member
Sep 18, 2005
63
0
0
delaware
Feb 5, 2006
#6
  • Feb 5, 2006
  • #6
thanx for all the help very usefull info, again thanx
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
D
Power steering pump bracket with A/C
  • Dczookster
  • Apr 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2025
rednotch
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
B
Engine Oil on water pump bolts
  • bn536
  • Jan 14, 2024
  • Fox 5.0 Mustang Tech
Replies
1
Views
986
Fox 5.0 Mustang Tech Jan 14, 2024
Noobz347
Engine OG “Quickie Cooler” Fan/WP Drive
  • 90trunk
  • Apr 17, 2024
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech May 5, 2024
90trunk
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?