So I had my heads and lower intake resurfaced and while they were at the machine shop. The machinest recommended that I get new intake valve seals cause they looked tired. Since seals are cheap I said go for it. Well now once the car warms up, it smokes a ton and the low oil light came on after 200 miles of driving. I'm super pissed about it but if it comes down to putting in new seals, How hard is it to do with the heads still on the car. I don't want to pull the heads again, and the lower intake if I can. I have a spring compressor but what other tools will I need. Thanks
Jeremy
Jeremy