• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

bushing kits for rearend....

  • Thread starter Thread starter Foxfan88
  • Start date Start date Sep 5, 2005

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Sep 5, 2005
#1
  • Sep 5, 2005
  • #1
i am looking for a complete rearend bushing kit for my msutang, i am having trouble finding them

on summit they control arm bushing kits, is that what i need??
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Sep 5, 2005
#2
  • Sep 5, 2005
  • #2
no, energy suspension sells the rear end kit for about $80

the control arms only should be about $25
 

5LugFoxFanatic

LOVE AND PEACE!
Founding Member
May 5, 2002
1,058
0
36
Arctic Tundra Hell, Twin Cites, Minnesota, USA
Sep 5, 2005
#3
  • Sep 5, 2005
  • #3
Make sure that if you do buy poloyurethane bushings to not use poly in the diff houseing. Put them in the lower control arms and only one in the uppers. Be careful when you put them in too. Your car will react differently. I drove my car on the track after I did mine and with rubber bushings, you can tell when the rear is going to kick out, with poly, you get grip and grip and then your rear will come around and scare the piss out of you. I just installed a panhard bar and no more rear end crazinness.....unless you really get on it.
 
B

Biggeley

New Member
Mar 4, 2003
136
0
0
Sep 5, 2005
#4
  • Sep 5, 2005
  • #4
The only bushings in the rear will be for the control arms... The only other rubber item that probably could stand to be replaced in the rear are the upper and lower spring isolators..
 
M

my05gt

New Member
Jun 26, 2005
9
0
0
Creedmoor, NC
Jul 15, 2007
#5
  • Jul 15, 2007
  • #5
I hate bringing stuff back from the dead, but I have searched for a while and found nothing.

This would be a follow up to the OPs question. How is everyone removing the original bushings from the control arms? A friend tried just pressing them out and was getting nowhere. Any ideas?
 

maxine-70

20+ Year Stangneter
Mar 27, 2003
273
1
18
louisville, ky
Jul 15, 2007
#6
  • Jul 15, 2007
  • #6
heat them with a torch. get the inner sleeve hot until it starts smoking good, then push it out. then heat the outer shell til it starts smoking, then push it out. super easy that way. wear rubber gloves, the rubber gets super gooey. dont take the outer shells out if you are planning on using urethane bushings as they reuse your stock shells
 
B

Biggeley

New Member
Mar 4, 2003
136
0
0
Jul 15, 2007
#7
  • Jul 15, 2007
  • #7
Yeah you got to heat them good with a torch -- the rubber bushings are glued to the shell. I found that using a 3-jaw puller in conjuction with heating the bushing shell worked really well. I was able to use the puller to "push" the rubber bushings out of the casing.
 
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
S
Suspension CC Plates bushings and sleeves?
  • Scott_S
  • Apr 16, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
167
Fox 5.0 Mustang Tech Apr 16, 2026
Mustang5L5
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
210
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
R
Suspension Bushings for SN95 Steering Rack with UPR K Member
  • Riley Barth
  • Jun 23, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
291
Fox 5.0 Mustang Tech Jul 8, 2026
Noobz347
C
93 Tubular A Arm Bushings
  • Chrispy62
  • Jul 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
142
1996 - 2004 SN95 Mustang -General/Talk- Jul 31, 2026
Chrispy62
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?