• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Buyer Beware! www.crossroadzdirect.com = poor.

  • Thread starter Thread starter Caldwell
  • Start date Start date Apr 8, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 8, 2006
#1
  • Apr 8, 2006
  • #1
Hey.

I'll keep this nice and short and sweet.

I bought 17 inch chrome saleen replicas from www.crossroadzdirect.com
who, up until this point i was very happy with.

Now, my driver's side wheel is completely peeling off. There isn't a scratch, a ding, a mark, NOTHING on the wheel, and the entire inner portion of chrome is coming off.

The rims have been on my car from April 05 to October 05 (7 months)

I sent them an email
and have called which resulted in a voicemail because no one would answer the phone.
It has been just over 7 business days and they have yet to contact me.

I am posting this message so others will know the dangers you face when you spend over $1000 on chrome rims. Beware! SOME companies do not stand behind their products and you should know which ones don't.

This is my bad experience and I hope you benefit from it.
 

myponyrocks

I have more billet on the Stang than most women ha
Apr 18, 2004
1,219
0
37
Apr 8, 2006
#2
  • Apr 8, 2006
  • #2
did you pressure wash the wheels?

Crossroads has been great the 2 times I used them. Also they don't make the wheel so hate the manufacturer. As to the customer service, it IS an internet based company, and it is also one of those times of the year people go visit thier families. I know it sounds like I'm making excuses for them, but it took me a bit of work to get in touch with them and I was very satisfied with the end result.
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 8, 2006
#3
  • Apr 8, 2006
  • #3
myponyrocks said:
did you pressure wash the wheels?

Crossroads has been great the 2 times I used them. Also they don't make the wheel so hate the manufacturer. As to the customer service, it IS an internet based company, and it is also one of those times of the year people go visit thier families. I know it sounds like I'm making excuses for them, but it took me a bit of work to get in touch with them and I was very satisfied with the end result.
Click to expand...

Pressure wash a mustang? are you mad?
No i don't pressure wash anything by the sidings of my house.

and unfortunately you're right, it was a manufacturing error, unfortunately dante design doesn't have a direct line to contact and because they [crossroadzdirect.com] supply their stuff, ultimately they are the ones that should be talking to their manufacturer about it. I don't know of any other company that doesn't stand behind the people they supply. it's just good business.

i was satisfied with them too, like i said. their shipping was spot on, their prices, reasonable.
but at this point it feels as though i'm being dodged, and if i don't feel comfortable when i spend $1000 + with a company, i think other people should be aware of it.

a turnaround time for contact isn't a month when a chrome wheel is peeling from an obvious manufacturing defect.
and i'll have the documentation to prove it in 48 business hours.

(edited for clarity.)
 
B

bakos24

I find there is nothing better than a tasty wiener
Nov 29, 1999
4,461
87
134
NE, OH
Apr 8, 2006
#4
  • Apr 8, 2006
  • #4
I had a bad experience with them and will not buy from them. I tried to order a Baer brake kit from them. 3+ weeks go by with out a word on whats going on with my order so I sent emails, no responce, try and call to see what is up. called them at least 5 times, got no answer, finally I waited and waited on hold for more than 10 mins before someone picked up just to find out that they could't get that kit anymore. They said they sent me emails which I never received.
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 8, 2006
#5
  • Apr 8, 2006
  • #5
bakos: Thanks for posting that up man, I appreciate that.
That sucks that you got the run around and the fact that they couldn't bother informing you of what was going on. I had the same phone call issue. I was on hold for an easy 10 minutes. Finally a machine answered because 'no one was available'

you've now got someone along with you who won't deal with them again.
 
B

bakos24

I find there is nothing better than a tasty wiener
Nov 29, 1999
4,461
87
134
NE, OH
Apr 8, 2006
#6
  • Apr 8, 2006
  • #6
Caldwell said:
bakos: Thanks for posting that up man, I appreciate that.
That sucks that you got the run around and the fact that they couldn't bother informing you of what was going on. I had the same phone call issue. I was on hold for an easy 10 minutes. Finally a machine answered because 'no one was available'

you've now got someone along with you who won't deal with them again.
Click to expand...

 

myponyrocks

I have more billet on the Stang than most women ha
Apr 18, 2004
1,219
0
37
Apr 8, 2006
#7
  • Apr 8, 2006
  • #7
like I said, don't think I'm bashing you. Bad crap happens, just was posting that I had 2 good experiances with them. As a ray of hope that maybe you will get things worked out.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Apr 8, 2006
#8
  • Apr 8, 2006
  • #8
I've had this happen on 2 sets of chrome wheels. One a set of aftermarket wheels for the mustang and another from OEM Lexus wheels. Both peeled/chipped around the edge of the wheel causing slow leaks in the tire pressure. I just chalked it up as chrome sucks and i'll stick to painted or polished wheels. Sorry about the crappy CS, some people are just slow?
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Apr 8, 2006
#9
  • Apr 8, 2006
  • #9
you guys are making me think twice about getting chrome
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 8, 2006
#10
  • Apr 8, 2006
  • #10
myponyrocks said:
like I said, don't think I'm bashing you. Bad crap happens, just was posting that I had 2 good experiances with them. As a ray of hope that maybe you will get things worked out.
Click to expand...

no i realize that, and i appreciate the optimism. I really do. I definitely don't look for a reason to post something negative about a company. I think it just comes down to my frustration that, there's always great customer service when you're spending the cash, but none when an issue or problem happens.
I hope they decide to help me out, but I know companies, family owned or not, and it always boils down the to the almighty $

droptopponynj said:
I've had this happen on 2 sets of chrome wheels. One a set of aftermarket wheels for the mustang and another from OEM Lexus wheels. Both peeled/chipped around the edge of the wheel causing slow leaks in the tire pressure. I just chalked it up as chrome sucks and i'll stick to painted or polished wheels. Sorry about the crappy CS, some people are just slow?
Click to expand...

It seems like that, slow or non-existant. only time unfortunately will tell on that side. See and what gets me confused is that there isn't a friggin mark on the rim, it's touchless, but still it's flaking off like no tomorrow. I'm just looking for after-purchase company support. I know bad things happen, but you need someone in your corner when it does.

urban96 said:
you guys are making me think twice about getting chrome
Click to expand...

It's not a nice thread, there's no doubt.
I just like to think that for every one negative post about something there are 10 people who've had good experiences and don't post because things are going so well.
it's only those who are aggitated who usually voice out.

LIKE ME!

haha
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Apr 8, 2006
#11
  • Apr 8, 2006
  • #11
Chinese chrome for the lose...
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 8, 2006
#12
  • Apr 8, 2006
  • #12
coramprat said:
Chinese chrome for the lose...
Click to expand...

Chinese chrome? haha
you gotta expand on that puppy...
what's chinese chrome?

 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 17, 2006
#13
  • Apr 17, 2006
  • #13
Sent a nice note off to crossroadzdirect.com about this thread. hopefully they care, but i doubt it.

anyway, good luck gang on future purchases!
 

281pony

Active Member
Aug 31, 2003
2,681
2
46
Oly, WA
Apr 17, 2006
#14
  • Apr 17, 2006
  • #14
urban96 said:
you guys are making me think twice about getting chrome
Click to expand...

get your chrome saleen's from wheelreplica's.

like 620 shipped for a set of 9/10" chrome saleen rims. no problems with 2 sets of them now. same size diameter as original center caps too if you want them.

gl with your issue caldwell.
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 17, 2006
#15
  • Apr 17, 2006
  • #15
281pony said:
gl with your issue caldwell.
Click to expand...

thanks dude
 

Z28 KILR

Founding Member
Aug 4, 2001
386
0
0
Columbus, OH
Apr 18, 2006
#16
  • Apr 18, 2006
  • #16
Is it just me or do alot of replica chrome rims peal? I have had a bad experience with chrome replicas pealing. At any rate I hope I have a better experience with these OE ones.
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 18, 2006
#17
  • Apr 18, 2006
  • #17
Z28 KILR said:
Is it just me or do alot of replica chrome rims peal? I have had a bad experience with chrome replicas pealing. At any rate I hope I have a better experience with these OE ones.
Click to expand...

See this is what's weird for me. I heard the opposite! Where the OE wheels were unreliable, and the reps were the rims of higher quality. Now I don't know what to believe.

Be certain on one thing though, chrome peels regardless of who puts it on, granted my rim was just crappy, resulting in the problem i have 7 months after purchasing.
but at least with oe wheels, you'll have a company that will back you up in the circumstance that your rim COULD peel.

me with my replicas? I'm s.o.l.
 

Scott 96Cobra

Founding Member
Jul 27, 1998
282
0
0
Toronto - Canada
Apr 19, 2006
#18
  • Apr 19, 2006
  • #18
The owner at the time is no longer the owner - that's part of the problem I think. He sold the business part way through last year. The owner when you purchased them is a great guy. He sold tons of my Stainless bumper Inserts. Great place to deal with.

The manufacture should take care of you ....

I recently had one of my centercaps on my Boyds start to loose the Name "Boyd-coddington". Greg Coddington said to send them back and he will swap them out for their new engraved centercaps (no charge). THAT is service.
 

Caldwell

New Member
Apr 27, 2004
528
0
0
Ontario Canada
Apr 19, 2006
#19
  • Apr 19, 2006
  • #19
Scott 96Cobra said:
The owner at the time is no longer the owner - that's part of the problem I think. He sold the business part way through last year. The owner when you purchased them is a great guy. He sold tons of my Stainless bumper Inserts. Great place to deal with.

The manufacture should take care of you ....

I recently had one of my centercaps on my Boyds start to loose the Name "Boyd-coddington". Greg Coddington said to send them back and he will swap them out for their new engraved centercaps (no charge). THAT is service.
Click to expand...

true, very very true.
but let's keep in mind, boyd > crossroadzdirect
boyd coddington is an incredible company to work with, that's why they have their name. customer service is a1.

i've tried to contact dante design but i have no idea what their webpage is, their info, nothing.
that's why i was caught and was relying on crossroadz to get me covered.

but that's interesting that you brought that up, see i didn't know that there is a new owner to the company.
in which case the bozo knows nothing about public support.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Apr 19, 2006
#20
  • Apr 19, 2006
  • #20
WOuld it be possable to take the rim to a crome shop and have it dipped? That way if these guys dont back you up, you wont have to buy a new rim. And sorry to hear that man.
Not too long ago, I ordered some CC plates from a web site (forget name)...2 weeks later NOTHING, and their # had been dissconected lol. Come to find out the company hadnt been active for 6 months, yet they still charged my card for the CC plates!
So I told steeda (who supplied the CC plates to them) and they gave me them for the $219 the rip off site was chargeing( retail for $249). Thats customer service (BTW Credit card CO got my money back)
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
549
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
For Sale 2000 GT Conv 4.6 block, heads lots of misc engine parts all removed,degreased, cleaned and inspected.
  • Tods Hot Rods
  • Sep 17, 2024
  • Engine and Power Adder Parts
Replies
3
Views
680
Engine and Power Adder Parts Sep 19, 2024
Tods Hot Rods
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
879
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?