c&l 76mm maf

[Finally a 5.0]

just want your opinions on this. i need a new maf and injectors, only going 24#'s, and these seem to be a pretty good deal. are they any good?

 

[legalize420]

no problems here

 

[legalize420]

you dont need 24's yet

 

[Finally a 5.0]

you dont need 24's yet

i have trickflow heads and a gt40 intake that'll be going on here soon. i want to be safe with that.

 

[legalize420]

i have trickflow heads and a gt40 intake that'll be going on here soon. i want to be safe with that.

i was going by what you had in your sig. 24's should be ok with the new heads and intake.

 

[Finally a 5.0]

i was going by what you had in your sig. 24's should be ok with the new heads and intake.

thats what i figured.

 

[18mustangs]

I use the C&L setup and love it. Mods are in the sig, not problems whatsoever.
Tim

 

[mo_dingo]

but you might as well go w/ some 30's, because the price isn't much more. So why not?
Scott

 

[final5-0]

but you might as well go w/ some 30's, because the price isn't much more. So why not?
Scott

I agree that 30's are the better choice for a combo of say 300 rwhp or a bit more. They work great with a custom tune.

They can be one of those CATCH 22 kinda things however

Most peeps stay with 24's for two reasons from what I've been able to figure

1) They try to get buy without a tune so they just up the pressure to make them act bigger. Many have done it with success.

2) They are afraid that they will have probs because again, they try to get buy without a tune. Their fears are justified based on my experience.

A Tune is just one on those things that nobody wants to spend money on, I know I didn't

Gady

 

[krahkin]

I run one with 30lb'ers and it works like a charm.