Calculating hg thickness

[TrueBlue95GT]

Can someone calculate what thickness head gasket I should buy for a 11.0:1 compression ratio on my motor if I give you the specs of everything? I'm getting ready to buy cometic head gaskets and I need to know what thickness I should get. Here are the specs:
Head cc: 61cc
Piston cc: -4cc
Bore: 4.030
Volume: 347ci
Deck: 2cc

 

[TrueBlue95GT]

anybody?

 

[shelbe67]

whats the piston distance down from tdc?

 

[final5-0]

Ask on Hardcore

Them boys will jump all over it

Grady

 

[Methodical]

Can someone calculate what thickness head gasket I should buy for a 11.0:1 compression ratio on my motor if I give you the specs of everything? I'm getting ready to buy cometic head gaskets and I need to know what thickness I should get. Here are the specs:
Head cc: 61cc
Piston cc: -4cc
Bore: 4.030
Volume: 347ci
Deck: 2cc

There are numerous compression ratio calculators out there. I used it when I built my 10.1 CC car. Do a google: compression ratio calculator. I used to have the sites but my harddrive crashed and I lost all of my websites -
starting all over again.

Edit: Ahhh found one: www.csgnetwork.com/compcalc.html. There are other automotive and non automotive calculators on this site

 

[TrueBlue95GT]

the builder decked the motor -.012 inches

 

[shelbe67]

if what I did with the desktop dyno is right thickness needed is .039 should give you 11.06:1

 

[TrueBlue95GT]

Can anyone double check because I want to be sure...