Well fellas is time for smog. These are my mods. Do ya think I have a shot at passing? Do you think the MSD ignition will help any?
CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle, windage tray, MSD ignition/dizzy/wires/coil, fluidyne rad, canton overflow, ceramic bbk shorty headers, 3.73, 30lb squirt, 255 fuel pump, c&l true flow pipe, 90mm lmaf, edelbrock performer intake ported lower, flowcooler highflow waterpump, romac 28oz balancer, underdriven crank pully, oil/tranny coolers, new ac pump/hoses/accumulator, 200amp alt, plx m-300 wideband o2 air/fuel monitor, autometer phantom oil temp/oil pressure/tranny temp/water temp, transgo shift kit, b&M deep tranny pan, 70mm tb, bbk intake spacer, high volume oil pump, magnaflow h-pipe with highflow cats (only 2 cats, one on each side), flowmasters, autopower 4 point, kirban adjustable fpr, subframe connectors, aluminum wire looms, aluminum driveshaft, tokico shocks, thats about all I can think of right now.
RESULTS ON POST #16!!
CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle, windage tray, MSD ignition/dizzy/wires/coil, fluidyne rad, canton overflow, ceramic bbk shorty headers, 3.73, 30lb squirt, 255 fuel pump, c&l true flow pipe, 90mm lmaf, edelbrock performer intake ported lower, flowcooler highflow waterpump, romac 28oz balancer, underdriven crank pully, oil/tranny coolers, new ac pump/hoses/accumulator, 200amp alt, plx m-300 wideband o2 air/fuel monitor, autometer phantom oil temp/oil pressure/tranny temp/water temp, transgo shift kit, b&M deep tranny pan, 70mm tb, bbk intake spacer, high volume oil pump, magnaflow h-pipe with highflow cats (only 2 cats, one on each side), flowmasters, autopower 4 point, kirban adjustable fpr, subframe connectors, aluminum wire looms, aluminum driveshaft, tokico shocks, thats about all I can think of right now.
RESULTS ON POST #16!!

