Calling all 03-04 Vortech'd Gt's

[4.6MustangMike]

i just finished installing my blower last night and i was hearing from some people that on 04 stangs using a lightning maf i need to get a temp sensor and put into the pipe right after the maf. Do i splice ? if so, how do i do this?

-Mike

 

[dsg_gt2004]

i just finished installing my blower last night and i was hearing from some people that on 04 stangs using a lightning maf i need to get a temp sensor and put into the pipe right after the maf. Do i splice ? if so, how do i do this?

-Mike

i have a question for you..are you installing a fuel pressure gauge and if yes, tell me how(since we dont have a schrader valve)

 

[4.6MustangMike]

i have a question for you..are you installing a fuel pressure gauge and if yes, tell me how(since we dont have a schrader valve)

ok well..no im not installing a fuel pressure gauge but if i were to install one i would make it easy ofr my self and buy an aeromotive fuel pressure regulator, and on the actual regulator there is a valve for the fuel pressure gauge. Note- this is not in the cabin but can be extended to it. Had this on my old stang..

-Mike

 

[2001sleeper]

put the temp sensor after the blower discharge. the MAF connector has two wires that need to be disconnected and those two wires attach to the temp sensor. get the temp sensor from a ford dealer for cheap. Search on some other forums for pics.

 

[ProCharger GT]

suggestion - get an SCT MAF and call it a day.