I just received a Ford 2.3 na motor/tranny on a trade. Im about to put it into an OT ride and had a few questions you all might be able to help me out with. I dont know a whole lot about the motor. Here is the info the guy gave me...direct quote
"bottom end completely rebuilt, but left stock, head is a d-port head that was checked and milled by Jim and Dan's head shop, over-sized stainless steel valves, twin titanium springs, alluminum caps, titanium keepers, stock cam"
has an exhaust header also... With that info (no solid numbers) can someone direct me in the way of a good cam? Daily driver...car weighs aprox 2,200lb with motor and transmission. Should be a fun little drive!
"bottom end completely rebuilt, but left stock, head is a d-port head that was checked and milled by Jim and Dan's head shop, over-sized stainless steel valves, twin titanium springs, alluminum caps, titanium keepers, stock cam"
has an exhaust header also... With that info (no solid numbers) can someone direct me in the way of a good cam? Daily driver...car weighs aprox 2,200lb with motor and transmission. Should be a fun little drive!
