Camshaft for late model GT's

Quite a few guys on the board, including Nickthegenius... GT2000Jay, etc.

You can expect to see typically close to 25rwhp gain and lopey idle which is oh such a sweet sound.

I don't have them, but they are a great mod. Expect 20 - 30 hp increase or even more. Sound awsome too. Expensive though. Figure at least $1000 with installation. You need a tune with them even if it is a mail order tune. Some of the "entry level" cams are fine with a mail order tune, but you need a dyno tune with more agressive ones. This adds to the cost. Also, with more agressive cams you need different valve springs which add another $200 for parts and even more labor. That can run close to $2000 if you include the tune with a professional instal. This is why most guys do heads at the same time. What's another $2000 for heads when everything is already opened up when already spending so much money?

Those prices are a just little over the top, but you get the idea it's not cheap.

Much cheaper of course when you do things yourself. You're just going to need a wideband A/F to tune your car if you don't want to spend the money on a dyno tune.

Im also thinking about getting cams. Either VT Engines stage 1 or Comp Cams. I want to be able to use the stock valve springs, and I want to do the install myself. I also dont want a cam that will make the whole house shake when I turn the car on. My car is already loud enough with my LT's, o/r h, and magnapacks. Theres pretty much zero chance of a supercharger in the future, but there is a good chance of nitrous probably a 100 shot of NX. Can anyone recomend a cam that would be good for me?