• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Camshaft Markings? ?

  • Thread starter Thread starter asecretfile
  • Start date Start date Aug 15, 2007

asecretfile

New Member
Feb 11, 2007
228
0
0
Aug 15, 2007
#1
  • Aug 15, 2007
  • #1
Next door neighbor bought a new Xcam today...the box says X303 and so does the paper insert that comes with it....but on the actual camshaft it says..
M6250F303...but the F is stamped really lightly and directly above that lightly stamped F is a hard stamped X...could that have been a marking error, because this cam was bought new as supposedly an X? Hopefully that hard stamped X right above it is what it truly is lol?

TIA
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Aug 15, 2007
#2
  • Aug 15, 2007
  • #2
Forgot to mention...the cam shows no wear...looks brand new and the box it came in was still sealed
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 15, 2007
#3
  • Aug 15, 2007
  • #3
Grind number for the X cam is: M-6250-X303

Grind number for the F cam is: M-6250-F303

Not much room for error

When you put the cam in the block (if you want), you can check the peak lift numbers with a dial indicator.

.512" for the F cam and .542" for the X cam.

More likely than not, it is the X cam with the other 'consistencies' you got (box/paper).

Good Luck!
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Aug 16, 2007
#4
  • Aug 16, 2007
  • #4
5spd GT said:
Grind number for the X cam is: M-6250-X303

Grind number for the F cam is: M-6250-F303

Not much room for error

When you put the cam in the block (if you want), you can check the peak lift numbers with a dial indicator.

.512" for the F cam and .542" for the X cam.

More likely than not, it is the X cam with the other 'consistencies' you got (box/paper).

Good Luck!
Click to expand...

yea I agree..the grind number stamp was somewhat distorted, and Ive seen FRPP stamps other times before and they were easy to read...

Id imagine its what the box and the paper insert says seeing as how that X was deep stamped directly above the barely stamped F

The M6250 letters dont even line up with the X303 part...off centered lol
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
620
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
B
Questions Replacing Cam Synchronizer
  • Blackout67
  • Jul 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
463
1996 - 2004 SN95 Mustang -General/Talk- Dec 23, 2025
01cstang
0
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
690
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?