• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Can I start my car like this?

  • Thread starter Thread starter aNotchAbove
  • Start date Start date Apr 23, 2007
A

aNotchAbove

New Member
Jun 7, 2006
75
0
0
Apr 23, 2007
#1
  • Apr 23, 2007
  • #1
Can I start my car with this line not connected to anything or plugged with anything? I removed the smog bar that runs behind the heads and this is what feeds that bar with air. Any ideas?

 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Apr 23, 2007
#2
  • Apr 23, 2007
  • #2
did u plug the heads heads where the smog line was? u removed that, but are still running the smog pump? not really sure whats going on here..... also, what year is your car? 4eye? the pic doesn't look like my setup, and i took all my smog stuff off....
anyways, cap your heads, and i'd bypass (and/or remove the rest of your smog stuff too since its non-functional anyways. u have emission testing there?
 
A

aNotchAbove

New Member
Jun 7, 2006
75
0
0
Apr 23, 2007
#3
  • Apr 23, 2007
  • #3
The reason for removing the smog bar was because after getting my heads milled it didn't fit properly. The holes on the back of the heads have been plugged for the time being. I need to start my car and drive it to the body shop and was wondering if it was possible to do like this?

The car is a '91 fox.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Apr 24, 2007
#4
  • Apr 24, 2007
  • #4
u should be fine to drive it there. do u have cats? but i'm confused! i have a 91, and it's not like your pic...???? hmmm
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Apr 24, 2007
#5
  • Apr 24, 2007
  • #5
You'll be fine. From what I hear if you have cats it's not good for the cats over a long period of time. If not, then you're all set. I drove mine around for a little while just like you have it. Once the car warms up it will make a funny noise from the smog pump pumping into the engine compartment, so I just got a short belt.
 

blackstangt

Member
May 31, 2004
460
1
19
ny
Apr 24, 2007
#6
  • Apr 24, 2007
  • #6
It won't matter unless you run it like that for a really long time w/ cats, as far as vacuum is concerned or engine performance it's fine.
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 24, 2007
#7
  • Apr 24, 2007
  • #7
the guy before me did that same thing and plugged it with a spark plug..i have since removed everything emmisions related

~Mark~
 
You must log in or register to reply here.

Similar threads

T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
158
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
309
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
148
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
826
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
909
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?