Can not run codes with the engine running

C

Camman

Founding Member

Jan 5, 2000

1,055

0

37

Las Vegas, NV

Dec 15, 2003

#1

• Dec 15, 2003

• #1

Hello, I have codes 22 and 67 with koeo tests. I try to do the engine running tests and I get nothing. When I ground the sti the engine almost dies, then it revs up to about 3000 rpm then slowly idles back down, then it just kicks on the mil and does nothing else. Am I doing something wrong? Is my car jacked up? Thanks for the help guys!!

 

C

Camman

Founding Member

Jan 5, 2000

1,055

0

37

Las Vegas, NV

Dec 16, 2003

#2

• Dec 16, 2003

• #2

anybody have any idea? I never get the engine id code or anything. Thanks for the help

 

C

Camman

Founding Member

Jan 5, 2000

1,055

0

37

Las Vegas, NV

Dec 17, 2003

#3

• Dec 17, 2003

• #3

Is tehre a place I can look for troubleshooting? I dont see anything in the service manual

 

Adam Dugger

Founding Member

Nov 15, 2000

584

1

18

Long Island, NY

Dec 17, 2003

#4

• Dec 17, 2003

• #4

I believe a code 67 KOEO is for the neutral drive circuit (safety switch). Make sure it is plugged in at the tranny and working.. or the EEC thinks the car might be in gear and wont run the self test KOER.

 

S

staticc

Founding Member

Sep 28, 2002

234

0

0

Jupiter, FL

Dec 17, 2003

#5

• Dec 17, 2003

• #5

when i was at my friends shop a week ago. i pulled the following codes... and also couldnt get a self test to run.

67.
85.
91.
185.

Code 67 - Improper signals are being received from either the Neutral Drive Switch (NDS),Neutral Gear Switch (NGS),Neutral Pressure Switch (NPS),Clutch Switch (CS),Manual Lever Position Sensor or Air Conditioner Clutch.

rest of the thread is over here: http://forums.stangnet.com/showthread.php?t=401096