can you use an 87-93 MAF sensor on our cars?

1994Vib.RedGT · Sep 29, 2005

al the good MAF sensors for cheap that I see on ebay are all for fox-bodies, I know there is the flange on ours, but can they work?

urban96 · Sep 29, 2005

yeah, electronics are the same. only diff is the bolt flange

tjh566 · Sep 29, 2005

it would work but you would have to figure out a way to put it on the pipe, our cars have a 4 bolt flang that bolts up and the foxes dont have that, they just are striaght.

final5-0 · Sep 29, 2005

1994Vib.RedGT said:
al the good MAF sensors for cheap that I see on ebay are all for fox-bodies, I know there is the flange on ours, but can they work?

Thats cause for every one of our cars there are at least 25 Fox Stangs out there...............check that...............most likely 100 to 1, lol.

Anyway

You can always cut off the flange.

More easier to rig up a cai without the flange anyway.

FLANGE! ...... We Don't NEED no Stinkin Flange

Grady

blk9450 · Sep 29, 2005

are you guys sure you can swap meters? c&l has different sample tubes for 87-93 and 94-95 for their meters, the sn95 meter is bigger, if it has the same physical electronics, then the computer calibrates it differently? or is the "sample tube" in the sn95 meter's hole larger?

legalize420 · Sep 29, 2005

good point about the c&l and good question. the fox is a 58mm and the sn95 is 70mm

VibrantRedGT · Sep 29, 2005

Have had a FOX meter on my car for 8 years (Pro-M 77MM shorty).

Finally a 5.0 · Oct 13, 2005

VibrantRedGT said:
Have had a FOX meter on my car for 8 years (Pro-M 77MM shorty).

what did you have to do to get it to work?

BlownFiveLiter · Oct 13, 2005

Plug it in, I would assume?
Just have to figure out how to mount it in the intake tubes, and it'll work.

legalize420 · Oct 13, 2005

blk9450 said:
are you guys sure you can swap meters? c&l has different sample tubes for 87-93 and 94-95 for their meters, the sn95 meter is bigger, if it has the same physical electronics, then the computer calibrates it differently? or is the "sample tube" in the sn95 meter's hole larger?

i thought the reason why you need a different tube is because of the different computer which would make me think they are not interchangeable. you might be right about it being the size difference.

VibrantRedGT · Oct 13, 2005

Finally a 5.0 said:
what did you have to do to get it to work?

Plugging it in. The connectors are the same. I made my own power pipe for it.

Slow5.0 · Oct 14, 2005

Right now i using Fox body 75mm chrome bullet Pro-M calibrated for 24# ,it works good, plus i have Tweecer too

Venom351R · Oct 14, 2005

blk9450 said:
are you guys sure you can swap meters? c&l has different sample tubes for 87-93 and 94-95 for their meters, the sn95 meter is bigger, if it has the same physical electronics, then the computer calibrates it differently? or is the "sample tube" in the sn95 meter's hole larger?

the 87-93 meter is the same as the 94-95. When I ordered my C&L the order sheet said 87-93, I called and they said it was the same thing. As long as your sample tube is for the right injectors then it will be fine.

Venom351R · Oct 14, 2005

Finally a 5.0 said:
what did you have to do to get it to work?

Plug it in, bolt it on.

blk9450 · Oct 14, 2005

Striped5.0 said:
the 87-93 meter is the same as the 94-95. When I ordered my C&L the order sheet said 87-93, I called and they said it was the same thing. As long as your sample tube is for the right injectors then it will be fine.

yea Physically the meter is the same, but the calibration of the electronics is different. read this chart and tell me the meters are interchangable. i just called c&l but they are not open yet. ill ask them because i need to know cause im switching from a 88 to a 94 with 30 lbs. maybe the old electronics and the red tube will work, i gotta see.

http://www.cnlperformance.com/calibration.html

Finally a 5.0 · Oct 14, 2005

VibrantRedGT said:
Plugging it in. The connectors are the same. I made my own power pipe for it.

so then if a pro-m is cal. for 24# on a fox, i can take that and change nothing but figuring out how to mount it to the intake tube and it will work like normal?

Venom351R · Oct 14, 2005

the calibration tube I had for mine was Red and I had #30 Injectors. But there is no application on that sheet for sample tubes being red and going w/ #30 injectors...weird

blk9450 · Oct 14, 2005

73mm Unit for 1986-1993 Mustangs (with factory A9L Style Processors)
Std 19lb Calibration Clear Tube (101)
24lb Fuel Injectors Blue Tube (102)
30lb Fuel Injectors Red Tube (103)
36/38lb Fuel Injectors Green Tube (104)

glasses?

Slow5.0 · Oct 14, 2005

blk9450 said:
73mm Unit for 1986-1993 Mustangs (with factory A9L Style Processors)
Std 19lb Calibration Clear Tube (101)
24lb Fuel Injectors Blue Tube (102)
30lb Fuel Injectors Red Tube (103)
36/38lb Fuel Injectors Green Tube (104)

glasses?

Thats what i was about to post, we have different color of tubes

blk9450 · Oct 14, 2005

just got off the phone with c&l. said electroniscs have to be switched AND the tube has to be changed from fox-94. i am wondering though, if i can just keep the old electronics and the maf electronics were calibrated in the 94 for the 70mm but gives the same voltage at the same flow. i have both electronics, so i may buy the correct tube for my 94-30# setup, then try the fox-30# setup and datalog it with my tweecer rt as far as maf voltage to see if they are different. hmmmm....

can you use an 87-93 MAF sensor on our cars?

1994Vib.RedGT

Member

urban96

bubb rubb says:"woo woooooo"

tjh566

New Member

final5-0

Mustang Master

blk9450

legalize420

Active Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

Finally a 5.0

New Member

BlownFiveLiter

have car, will race....wait, it doesn't run

legalize420

Active Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

Slow5.0

Active Member

Venom351R

Venom351R

blk9450

Finally a 5.0

New Member

Venom351R

blk9450

Slow5.0

Active Member

blk9450

Similar threads

can you use an 87-93 MAF sensor on our cars?

Member

bubb rubb says:"woo woooooo"

New Member

Mustang Master

Active Member

"STANGNET'S PENGUIN SMACKER"

New Member

have car, will race....wait, it doesn't run

Active Member

"STANGNET'S PENGUIN SMACKER"

Active Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency