CAR ALMOST DONE.

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Apr 16, 2004

#1

• Apr 16, 2004

• #1

Well, my combo is almost ready, CAN'T WAIT !! One problem is, the 80mm Plastic MAF is so huge, I can't figure out a system to hook up the inlet tube to it and the t-body.. what have you guys done? use 4" pvc, 4" rubber connectors, and that's it? any thoughts? that, and my ignition are all that's left !!!

Dyno coming soon I hope !! (assuming it fires up !)

 

Zero Signal

Active Member

Feb 24, 2003

2,633

2

46

Tucson, AZ

Apr 16, 2004

#2

• Apr 16, 2004

• #2

You gonna tune it all yourself?

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Apr 16, 2004

#3

• Apr 16, 2004

• #3

jetuomi said:

Well, my combo is almost ready, CAN'T WAIT !! One problem is, the 80mm Plastic MAF is so huge, I can't figure out a system to hook up the inlet tube to it and the t-body.. what have you guys done? use 4" pvc, 4" rubber connectors, and that's it? any thoughts? that, and my ignition are all that's left !!!

Dyno coming soon I hope !! (assuming it fires up !)

Click to expand...

I do know what you mean about the maf. When I took mine out of the box I was shocked at the size.

For my home made CAI from the throttle body I used a 3 inch rubber plumbing connector to a 3 inch section of pvc pipe to another connector to the maf which is in the fender. The whole deal is a straight shot. Very easy and works good.

Later
Grady

 

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Apr 16, 2004

#4

• Apr 16, 2004

• #4

okay, thanks guys, new thread starting about the motor..... SICK..

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Apr 16, 2004

#5

• Apr 16, 2004

• #5

This may help....My Pro77 is a 4" also....you can do up a PVC set-up....
4" to 3" Fernco for the MAF....then PVC to the TB.. a 3" will connect the PVC to the TB...

 

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Apr 16, 2004

#6

• Apr 16, 2004

• #6

RIO5.0 said:

This may help....My Pro77 is a 4" also....you can do up a PVC set-up....
4" to 3" Fernco for the MAF....then PVC to the TB.. a 3" will connect the PVC to the TB...

Click to expand...

OH DAMN that's exactly what I need !!!!!!!
tx