car apart please help

MM sent me this pic to show the typical strut rod height and spacer stack.
Hope it's of some use.



Hop

EDIT: When I had the CC plates installed I remember the Strut rod height was different between the two struts. One side had about 6 threads exposed and the other about three (~1/2"). Took all the spacers out and stacked them next to each other and they were the same. I put different spacers back in (also the same height when stacked next to each other) that MM gave me and, oddly enough, the strut rods were now even. Thought I was in the Twilight Zone.