• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

car didn't start?? help please...(pics)

  • Thread starter Thread starter mustangsally93
  • Start date Start date Mar 20, 2006

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Mar 20, 2006
#1
  • Mar 20, 2006
  • #1
My car went to this
View attachment 483019
to this in 24 hours
View attachment 483021


Well we got it all back in and stuff. When we started to do the timing, it just would'nt stay running. So we moved the dis. around a lot. We had it running at 500 rpm but it was running bad. It would run fine at 2 or 3 grand. No leaks or knocking or anything. We have every thing right I think. Could it be a vac. leak?( we didn't think so) I'm just lost.. if you guys can help thanks, or if you need any other question to help just say it..
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Mar 20, 2006
#2
  • Mar 20, 2006
  • #2
help please
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Mar 20, 2006
#3
  • Mar 20, 2006
  • #3
in the second pic i see the problem...you need a battery to start the car.j/k double check static timing, vacuum lines, engine grounds.
 
L

lmarinukjr

New Member
Oct 22, 2005
75
0
0
Mar 20, 2006
#4
  • Mar 20, 2006
  • #4
check timing and firing order mine did almost the same thing i had firing order on 2 cylinders wrong
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Mar 20, 2006
#5
  • Mar 20, 2006
  • #5
lmarinukjr said:
check timing and firing order mine did almost the same thing i had firing order on 2 cylinders wrong
Click to expand...


IF THE TIMING WAS OFF WOULDN'T IT BE BACK FIRING? ALSO WE GOT THE PLUG RIGHT AFTER THE SECOND TRY, ALSO HOW WOULD A VACUUM LEAK MAKE IT NOT RUN AT ALL? also on the bottom of the upper intake I'm sure we missed the lines up under there.
 
A

a97mustang

New Member
Feb 2, 2006
61
0
0
Lincoln Park michigan
Mar 20, 2006
#6
  • Mar 20, 2006
  • #6
can you video
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Mar 20, 2006
#7
  • Mar 20, 2006
  • #7
a97mustang said:
can you video
Click to expand...


no i can't im back in kansas and shes in Nebraska
 
L

lmarinukjr

New Member
Oct 22, 2005
75
0
0
Mar 20, 2006
#8
  • Mar 20, 2006
  • #8
if the timing was off it may not backfire but be off enough to make the car run like caca
 
L

lmarinukjr

New Member
Oct 22, 2005
75
0
0
Mar 20, 2006
#9
  • Mar 20, 2006
  • #9
and a vaccum leak would make the car run either way rich or lean im not exactly sure which way i shut my brain down a while ago but in either case the car would run like poo
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Mar 20, 2006
#10
  • Mar 20, 2006
  • #10
ok guys........ It only did that a little for a spot about a inch on the dis. We moved it every which way and didn't run at all if you let off the gas. It should run ( bad or good) and one point. But no matter what it didnt. I put the cam and crank shaft marks straight up and down on the timing chain. I dont know what else to do? Also do you guys have pics or anything to know where the vaccum lines go? my book didnt show to the point where they go.......and when I get this done I'm saleing all of my pony! I tired of miss with this sh it!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 21, 2006
#11
  • Mar 21, 2006
  • #11
See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine

http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

http://www.veryuseful.com/mustang/tech/engine/images/88-91eecPinout.gif

Diagram courtesy of Tmoss & Stang&2birds

http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg
 

Attachments

  • mustangFoxFordVacuumDiagram.webp
    37.3 KB · Views: 157

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Mar 21, 2006
#12
  • Mar 21, 2006
  • #12
u pulled the spout when you were setting the timing...correct?
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
228
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
567
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
147
Off-Topic Hangout Jul 20, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?