• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

car is at the tuner have a few questions.

  • Thread starter Thread starter Stang01GT
  • Start date Start date Jul 25, 2006
S

Stang01GT

New Member
Apr 20, 2003
138
0
0
New Jersey
Jul 25, 2006
#1
  • Jul 25, 2006
  • #1
this weekend thanks to tomyb1976 from modular depot he put my vortech v2-sq supercharger on my car, with 42 lb injectors, svt focus pump, powerpipe, etc. Anyway its at the shop getting tuned and my tuner told me my fuel pump is maxing out at 6200 rpm, i thought svt focus pumps were good for around 400 rwhp and i thought id prolly be making 370rwhp. Also i wasnt sure what the rev limiter was gonna be set at, he said it would be around 6800 rpm cause the car pulls up to that, is that safe for a stock gt engine, anyway i should be getting the car back tommorow i hope its running good.
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Jul 25, 2006
#2
  • Jul 25, 2006
  • #2
If I were you I would be getting my car tuned somewhere else If they said I could pull till 6800...
 

blacknblue2002

Member
Jul 3, 2005
159
2
18
Va Beach, Va
Jul 25, 2006
#3
  • Jul 25, 2006
  • #3
6800 seems pretty dangerous to me....I didn't even go over 6000 when I had my car on the dyno...do you have a heavily modified block?
 
S

Stang01GT

New Member
Apr 20, 2003
138
0
0
New Jersey
Jul 25, 2006
#4
  • Jul 25, 2006
  • #4
no definetely not, its a stock gt engine, only additional mods with the vortech supercharger are the what's listed in my sig. What is a good limit to set my redline at, and should my focus pump be maxing out already, also its a stock 3.6 pulley
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jul 26, 2006
#5
  • Jul 26, 2006
  • #5
those guidelines of " this pump is good until X horsepower" is only a very crude basic guide.. Some cars will be fine at 400 HP with a focus pump other setups will not be at 350 HP...
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
934
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Stand alone vs chip tune (for noob)
  • nicholase
  • Jan 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
44
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2025
Noobz347
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
522
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?