• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Car towing??

  • Thread starter Thread starter asecretfile
  • Start date Start date May 9, 2009

asecretfile

New Member
Feb 11, 2007
228
0
0
May 9, 2009
#1
  • May 9, 2009
  • #1
87 Mustang GT 5 speed

Will it hurt anything if I tow the car with the front on the tow dolly with the car in neutral?

Going to be towed about 15 miles

My front end sits pretty low and will scrape just about anything if I raise the back of it onto the dolly

thanks
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
May 9, 2009
#2
  • May 9, 2009
  • #2
It shouldn't since you have a 5 speed..
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
May 9, 2009
#3
  • May 9, 2009
  • #3
i'd disconnect the driveshaft anyway just to be sure, better safe than broke
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
May 9, 2009
#4
  • May 9, 2009
  • #4
Like 91 said I would disconnect the driveshaft anyway. I have heard people say it was fine with a 5 speed and others say that it was still a even with a manual. Its not hard to disconnect the DS and its cheap insurance just in case.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
May 9, 2009
#5
  • May 9, 2009
  • #5
You shouldn't because the T-5 wasn't meant to be driven with only the mainshaft turning and the countershaft stationary.

The countershaft is what moves fluid around and basically lubes the top bearings through splash lubrication.

SInce it won't be moving without the engine running, you could very well starve some bearings of fluid...esp the input shaft to mainshaft roller bearings. If this happens you could gall the maintshaft and end up with a noisy t-5.

Thats what would happen in theory. Has it every really happened? Who knows. Some guys have done it with no probs, but the potential risk of what i just said is still there
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
May 9, 2009
#6
  • May 9, 2009
  • #6
Ehh ive done it before, Just put it in neutral and it didnt hurt a thing. Of course I only towed it like that for about 3 miles
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,392
3,539
233
May 9, 2009
#7
  • May 9, 2009
  • #7
I have always wondered that myself. I see motor homes all the time pulling cars or Jeeps behind them and thought that cant be good. A friend just bought an 02 Jeep Wrangler with 310,000 miles on it. 20,000 of which the Jeep was running (was his Grandfathers), the rest of the time it was being towed. I helped him install new shocks and fuel pump and ignition coil, other then that the only thing his Grandfather ever replaced was tires and oil, nothing else. Jeep shifts and drives great.
Are the transmissions internal operations different on a Jeep? Does it pump fluid when in neutral?
 

asecretfile

New Member
Feb 11, 2007
228
0
0
May 9, 2009
#8
  • May 9, 2009
  • #8
well, towed it in neutral with no problems. not saying it was ideal but I did however in addition to having it in neutral, I used a piece of wood to hold down the clutch pedal. Not sure if that helped or hurt but did it anyways
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
May 9, 2009
#9
  • May 9, 2009
  • #9
Just put the handbrake on and youll be fine.
 

ID89GT

10 Year Member
May 26, 2008
1,659
18
49
Spokane Valley, WA
May 10, 2009
#10
  • May 10, 2009
  • #10
For only 15 miles, you should be alright. But if it was like 100 plus miles, then I would disconnect the drive shaft. My teacher told me a story of a guy who was towing his truck from the south up north somewhere and the tranny seized about 400 miles into..
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,359
209
114
Ohio
May 10, 2009
#11
  • May 10, 2009
  • #11
LaserSVT said:
I have always wondered that myself. I see motor homes all the time pulling cars or Jeeps behind them and thought that cant be good. A friend just bought an 02 Jeep Wrangler with 310,000 miles on it. 20,000 of which the Jeep was running (was his Grandfathers), the rest of the time it was being towed. I helped him install new shocks and fuel pump and ignition coil, other then that the only thing his Grandfather ever replaced was tires and oil, nothing else. Jeep shifts and drives great.
Are the transmissions internal operations different on a Jeep? Does it pump fluid when in neutral?
Click to expand...

I was researching flat towing a Geo Tracker which would be similar to the Jeep, it was recommended to put the Transfer Case in Neutral but the Tranny in 2nd Gear, I guess it pumps fluid around that way.
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
740
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
147
Other Auto Tech May 31, 2026
LILCBRA
New gal in San Diego
  • Mustang Momma
  • Feb 11, 2026
  • The Welcome Wagon
Replies
3
Views
198
The Welcome Wagon Feb 11, 2026
Mcmahst
1979 Pace Car Build- #887
  • darryl27529
  • Aug 6, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
Willybill32
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
846
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?