Car Will Not Idle!!!!!!!!!1

89gt40lx

New Member
Jun 30, 2005
13
0
0
Orlando Florida
I HAVE A STOCK INTAKE NOW... with gt-40 alluminum "Y" heads, E-CAM 24lb injetors 70mm mass air....

:fuss: CAR WILL NOT IDLE!!!!!! :fuss:

:shrug: will idle for about a minute then it shuts off...then when i go to fire the car back up it just cranks for almost a full 60 seconds and i have to feather the throttle to get it to fire back up.. then one big puff of black smoke (gas) the most potent gas smell ever.... :shrug:

its like car car is getting too much fuel...(flooding) but its fuel injected im so confused :shrug:
 
Please provide a brief chronology of the parts you've recently installed including:

heads
cam
intake
fuel injectors
throttle body
mass air sensor

... anything that you've done or installed new since the last time your car ran.
 
Ok, that's the second time you've told us what you've "got". Tell us what your car already had installed the last time that it ran correctly. Then tell us specifically, what those parts are that you most recently installed that are now making your car NOT run correctly. In other words: What exactly are the changes you made between the time that the car ran well and now. Saying only that you've got parts X, Y, and Z, doesn't tell us squat. The parts themselves are not the problem (unless they're broken). How do you exepect us to help diagnose the problem with nothing more than a list of parts? What exactly was taken apart? What parts were reinstalled and what parts were replaced since the last time the car ran well? For all I know, you're trying to run a 70mm MAF sensor on an SD computer or maybe a 70mm sensor calibrated for 19lb injectors with 24 lbers. You get my meaning?
 
i bought the car it was stock...it ran fine..........ok..........i put the heads, cam, injectors, rockers on the car it ran fine....then i put on an msd 6AL i cant remember if the car started the problem befor or after the msd..but when i put on the heads cam injectors mass air it ran fine for about a week...also when i put on the heads and stuff i put a new stock fuel pump in...also new o2 sensors but thats all i have

so like i said it ran fine with all the mods then all the suddin it was running like ****....and i cant remember if it was messing up before or after i put the 6AL on but i know i have it on right...
 
Ahhhhh... that helps. My first suggestion would be to pull the MSD out of the loop and reinstall your stock ingnition. If there's not change then you may want to start looking into things like possible vac leaks, bad MAF sensor, broken or loose wiring, and adjsutments in your IAC and TPS sensors.