Car Wont Start!!!

Guero · Jun 16, 2007

God Damn my luck!!!! Car wont start. Theres fuel pressure. Could it be the TFI Module??? I mean I got it used, 110* weather, and that time I made the distributer spark.....

Guero · Jun 16, 2007

Oh yeah theirs no spark present anywere and all my fuses are good

HISSIN50 · Jun 16, 2007

Is there injector pulsing?

Guero · Jun 17, 2007

Im at work right now. Theirs no spark though. Would their be no spark if theirs no pulse availible???

HISSIN50 · Jun 17, 2007

If you have injector pulsing (even though you have no spark), that tells you that your PIP is ok.
If you have no spark and no injector pulsing, the PIP is a very good place to look.

Guero · Jun 17, 2007

Damn Hissin your smart....I need a noid light, is their any other way to tell???? Like a cheap way Im saving up for my big tattoo

HISSIN50 · Jun 17, 2007

You can use an LED if you have to. Just be sure the LED can handle 12 volts.

An LED test light would work too.

I dont wanna know about the tattoo.

Ok, I do. What are you getting done?

Guero · Jun 17, 2007

Im gonna get 2 faces of a Lion on my back. I have a pic on myspace of the lion I want. Their gonna cover most of my shoulders.

I just jump the led light to the wires on the injectors right???

Guero · Jun 18, 2007

Hey Hissin, would their be injector pulse with out the TFI Module on the car or the coil. I took them out, but i wanted to know if their would be pulse if I crank the engine.

HISSIN50 · Jun 18, 2007

Guero said:
Im gonna get 2 faces of a Lion on my back.

When I first read that, I thought it said you were going to get two feces of a Lion. I was thinkin WTF is up with Guero.

Guero said:
Hey Hissin, would their be injector pulse with out the TFI Module on the car or the coil. I took them out, but i wanted to know if their would be pulse if I crank the engine.

You do simply test across the two wires going to a given injector (like you'd test your battery except that it's an injector connector instead).

There should be NO pulse without a TFI. The signal goes from the PIP to the TFI, so no TFI = no injector pulsing. That's why there are rare occasions that the No inj pulsing, no spark = bad PIP test fails. I only recently started posting that it was a possibility because I'd never actually seen the scenario before. I now have once.

On your TFI module, Pin 6 is PIP power in. You could check that terminal if wanting to see if the PIP works.

Good luck bud.

Guero · Jun 18, 2007

How would I check Pin 6???

Ok So if the PIP is working, their is still a possibility that their will be no pulse if the TFI isn't working????

HISSIN50 · Jun 18, 2007

Guero said:
How would I check Pin 6???

Ok So if the PIP is working, their is still a possibility that their will be no pulse if the TFI isn't working????

It's not worth bothering with testing Pin 6 at this point.

There is a chance that a bad TFI can keep the injectors from firing but it's so remote a chance that I would almost forget about it. I only mention it because there's a tiny chance that's the issue.

If your TFI is off the car now, just have it tested at the parts store and if it's ok but you have no spark or inj pulsing, figure the PIP is bad. Testing the PIP is a real PITA (I think you'd look for AC with an inverted vane/shutter signal).

Guero · Jun 18, 2007

I asked around and no one tests the TFI Module....

HISSIN50 · Jun 18, 2007

I know you've done it but keep trying. A lot of times the kids who answer the phone don't know about something so their default reply is 'no'. An old timer at the store can often be of assistance. And to that end, sometimes it's cool to go into a good store (Napa, Merles, etc) and just ask an old timer. If they cannot do it, they sure know who can.

Or reinstall the TFI (you dont need the coil right now) and do your testing.

Good luck.

Guero · Jun 18, 2007

Well my I have 2 friends working at 2 different stores. They know what their doing. I bought the Module. I installed it. But my dumbass left the key since the last time I tried to start it. So i charged it, the car started right up and no more than 10 seconds later it shut of. It would start again!!!!!!

HISSIN50 · Jun 18, 2007

Guero, keep starting it till it shuts off and wont restart. Then check for injector pulsing while it cranks but will not actually start.

Good luck bud.

Guero · Jun 18, 2007

It wont start again!!!!!!! Piece of ****ing ****!!!!!!!!!!!

Pokageek · May 4, 2008

Did u figure this out?

tstang21 · May 5, 2008

i heard of this before. try checking your fuel filter and see if its clogging up any fuel

BlackVert · May 5, 2008

yep. he fixed it by INSTALLING A CARBURETOR

Car Wont Start!!!

Active Member

Active Member

"How long does it take to get help in here?

Active Member

"How long does it take to get help in here?

Active Member

"How long does it take to get help in here?

Active Member

Active Member

"How long does it take to get help in here?

Active Member

"How long does it take to get help in here?

Active Member

"How long does it take to get help in here?

Active Member

"How long does it take to get help in here?

Active Member

Active Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency