Cat-back opinions

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Jul 23, 2004

#1

• Jul 23, 2004

• #1

Hey guys...

I'm getting a little bored with my MAC cat-back (plus, it's rusting out and fits like crap). So I'm thinking about what I might replace it with. Three different options come to mind:

1. Magnaflow (not Magnapacks)
2. Spintech side exhaust
3. CDC side exhaust without the skirts (mufflers are Dynomax super turbos)

The Magnaflow & Spintech are about the same price ($435), the CDC is $500. I'm leaning towards the CDC, because the super turbos should be quiet, and then I can run my Dr. Gas X-pipe full time .

Opinions? I have never heard Spintech mufflers. And I don't know anybody with side exhaust -- but it sounds fun, and would make my panhard bar installation simpler...

Dave

 

Nik_95Cobra

Founding Member

Feb 5, 2002

1,677

1

37

Tempe, Arizona

Jul 23, 2004

#2

• Jul 23, 2004

• #2

Well, Bassani Owns. Never heard anything bad about spintech either.

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Jul 23, 2004

#3

• Jul 23, 2004

• #3

Go with the CDC... Love the looks of side exhaust

 

5

5literstang

New Member

Apr 15, 2003

1,374

0

0

Clark, NJ

Jul 23, 2004

#4

• Jul 23, 2004

• #4

my vote is for the Spintechs

 

Joes95GT

New Member

Jan 23, 2003

3,132

1

0

Delaware

Jul 23, 2004

#5

• Jul 23, 2004

• #5

I'd immediately forget about the side exhaust, just based on the fact that those twists and turns can't help performance.

I like my Magnaflows, however they are pretty loud with my Prochamber. I always thought they were quiet until I did my H/C/I.

Joe

 

Joes95GT

New Member

Jan 23, 2003

3,132

1

0

Delaware

Jul 23, 2004

#6

• Jul 23, 2004

• #6

How about Borla? It's very expensive, but they have one version that is extremely quiet and performs with the best of them.

Joe

 

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Jul 23, 2004

#7

• Jul 23, 2004

• #7

Joes95GT said:

I'd immediately forget about the side exhaust, just based on the fact that those twists and turns can't help performance.

Click to expand...

I'm thinking that with the turn the pipe makes out of the muffler on the side-exhaust, it shouldn't be all that much different than the turn up over the axle when it's going out the rear. A lot of mufflers make turns inside the muffler irregardless of where the entry and exit is.

Besides, Joe, I no longer care about performance . I can't afford to care much about it, with AFR165's making 280 rwhp .

Dave

 

D

DaveB

Founding Member

Jul 13, 2002

637

0

0

Middlesex and Pomona, NJ

Jul 23, 2004

#8

• Jul 23, 2004

• #8

Id go with the Magnaflow myself. While I have heard that Spintechs are great, the Magnaflows will sound awesome with your H/C/I combo matched with the Dr. Gas x-pipe.

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Jul 23, 2004

#9

• Jul 23, 2004

• #9

you know my vote

spintechs all the way baby.

the muffler design behind the side exit is the same style as a C5 vette, so the design isnt all that bad

 

Joes95GT

New Member

Jan 23, 2003

3,132

1

0

Delaware

Jul 23, 2004

#10

• Jul 23, 2004

• #10

HairyCanary said:

I'm thinking that with the turn the pipe makes out of the muffler on the side-exhaust, it shouldn't be all that much different than the turn up over the axle when it's going out the rear. A lot of mufflers make turns inside the muffler irregardless of where the entry and exit is.

Besides, Joe, I no longer care about performance . I can't afford to care much about it, with AFR165's making 280 rwhp .

Dave

Click to expand...

You could be right Dave. The only side exhaust I've ever seen in person came along the back of the side skirt, and instead of dumping right behind it, it did this weird twist to accommodate a muffler right before exiting the car. Weird. I can't remember who made it though...

Joe

 

Venom351R

Founding Member

Apr 27, 2002

4,548

41

98

MAINE

Jul 23, 2004

#11

• Jul 23, 2004

• #11

Magnaflows, they make alot of power and flow alot of air

 

SN95StangMan

New Member

Jul 5, 2003

1,292

0

0

Lynwood, CA

Jul 23, 2004

#12

• Jul 23, 2004

• #12

I vote for spintech.

 

S

SuperDust22

The Power of Pixie Dust?!

Oct 19, 2003

1,821

0

0

Gilbert,AZ

Jul 23, 2004

#13

• Jul 23, 2004

• #13

Spintech or bassani. I love my bassani. You can hear them in my sig.

Dustin

 

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Jul 23, 2004

#14

• Jul 23, 2004

• #14

I've heard some people say good things about the Spintechs, the only thing that worries me is the sound -- how loud are they? One nice thing about the Dynomax mufflers would be the ability to run my X-pipe without waking up the neighborhood when I start the car . (unlike some people, I actually don't like it really, really loud... ).

It's also such a simple idea, I wonder if I could do it myself. Pick up some generic mufflers with in/out on the same end that are the right size to fit, and then fabricate the tube that goes out the side... Might be cheaper than $500.

Dave

 

Q

Quick5pnt0

Founding Member

Aug 21, 1999

1,208

0

36

north eastern PA

Jul 23, 2004

#15

• Jul 23, 2004

• #15

HairyCanary said:

I'm getting a little bored with my MAC cat-back (plus, it's rusting out and fits like crap).

Click to expand...

A little OT but how quickly did your Mac system start rusting? The reason i ask is because years ago a good friend of mine bought a Mac system for his 89lx and within six months the chrome on the tips had completed rusted and peeled off. He called Mac and sent them pictures of the tips and they sent him another set for free.
Assuming that he had a freak set i bought a catback system last year for my car. The mufflers, tailpipes, etc are looking ok still but the damn chrome tips are starting to get a heavy surface rust on them. I got most of it off, but it kills me how quickly these damn system start rusting.

 

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Jul 24, 2004

#16

• Jul 24, 2004

• #16

Quick5pnt0 said:

A little OT but how quickly did your Mac system start rusting?

Click to expand...

Can't say -- the system was already installed when I bought the car in February 2003. Interestingly, the chrome on the outside of the tips seems to be fine -- it's the rest of the pipes that are rusting away. Makes me want stainless for my next catback.

Dave

 

VIPERn94Five-0

Founding Member

Apr 28, 2002

3,352

2

58

Poughkeepsie, NY

Jul 24, 2004

#17

• Jul 24, 2004

• #17

well...based on my sig im sure you can figure what exhaust i would suggest....the side exhaust might be really cool....i havnt read anything about that brand...but i will after posting this...


Anthony