cfm ratings of stock electric fans

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
hello, i need the best flowing fan i can find and i would like it to be a shrouded stock fan. anybody have a list or know where to find this info.

sn95
taurus
lincoln
cobra

thanks, this will go on a 69 block bored .060 over with a dual 1 inch core all aluminum radiator with a cowl hood.
 
how about a taurus sho fan, i was working on one today and it has dual fans, would that be a good setup also or is that not worth the hassle compared to the lincoln
 
dastang2 said:
how about a taurus sho fan, i was working on one today and it has dual fans, would that be a good setup also or is that not worth the hassle compared to the lincoln
i have never seen numbers on the SHO fan (is it for a 3.0L 24 valve Yammie motor?)

i dont think you will find a fan that is much more of a PITA to do than a mark 8. gotta trim the shroud and they eat conventional relays at times; a Bosch 75 amper is a minimum (mark 8 fan can draw over 100 amps upon startup!!).

sorry i dont know about the SHO fan, but im interested.

good luck and bump for ya. :)
 
it has a 3.2 in it. it's a 95. the fans are fully shrouded and they look like they flow good cfm's. anybody have any pics or any tech write ups on the mark 8 fan or any fan listed above.
 
Try www.dccontrol.com -- they sell fans and the best control system out there - varies the current and speed of the fan so it only runs as fast a speed as needed to cool the car. B. Baskin there can tell you the cfm of the fans you're considering. Email him at [email protected]. Also, another possibility is the SPAL dual 11" fully shrouded fan set up. Pulls 2780 cfm. I run it on mine - MORE than sufficient at cooling the engine with air.