i went to performance autosport today and talked to the main mechanic there about my chassis stiffening that i have been wanting forever. he says he like the grigs full length, yada yada, but he went on to mention how he has to take your interior out, drop them in, weld it all there and he was talking about some kind of plates that weld behind where they mount in the back. i forget what he called them though. he siad the kit improved chasis stiffness by 1500 percent and it was like 300 and some change dollars for the kit itself. any idea what this is about?
he said it took him something like 12 hours to do this (take interior out, cut floor, weld together, setup, paint, put interior back, vinyl over bars in floor, ect.) and he charges like 40 bucks an hour or something.
thank god im in the central VA mustang club, he siad he takes 10 bucks off the hourly rate for members of clubs.
can anyone tell me some of this stuff again, i forget stuff easily, and shine some light on what i should do. 12 hours of 40 dollar labor is 480 dollars and then the kit was 300 some, so thats 780 at the least.
thanks guys.
edit- the brackets are called bulkhead stiffeners.
he said it took him something like 12 hours to do this (take interior out, cut floor, weld together, setup, paint, put interior back, vinyl over bars in floor, ect.) and he charges like 40 bucks an hour or something.
thank god im in the central VA mustang club, he siad he takes 10 bucks off the hourly rate for members of clubs.
can anyone tell me some of this stuff again, i forget stuff easily, and shine some light on what i should do. 12 hours of 40 dollar labor is 480 dollars
thanks guys.
edit- the brackets are called bulkhead stiffeners.
GreatWhite
Member
bigcahoona
Member
I had Kenny Brown Sub-Frame connector's welded in on my 88 LX. I took the back seat out, rolled the carpet on the back floor toward's the front. Where the seat was you will have to scrap the padding off around the area that's getting welded. My guy put ice cold water inside the connector (the water stay's up front in the connector) and welded the front first. This way i did not have to pull up the carpet in front. Then he welded the back. Let it cool, put your carpet back, put you seat back then get some good black spray paint and spray the weld's and connector's. Sub- Frame connector's $99.00
Labor $175.00 Paint $4.00. Oh I also installed front stut tower brace $99.00
Labor $175.00 Paint $4.00. Oh I also installed front stut tower brace $99.00
GreatWhite said:Sounds like he wants to do full-length subframes and torque box reinforcements.
is that what the bulkhead deals are?
onefstsnake
New Member
Wow...
The shop Im getting my SFC's put on is going to charge me $175 for everything.
They make their own SFC's and they "load" the chassis and run a full bead on all the mounting points.
Here is my buddies car that they did.
View attachment 478351
The shop Im getting my SFC's put on is going to charge me $175 for everything.
They make their own SFC's and they "load" the chassis and run a full bead on all the mounting points.
Here is my buddies car that they did.
View attachment 478351