• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cheap Cold Air

  • Thread starter Thread starter GT_Rich
  • Start date Start date Apr 19, 2006

GT_Rich

Member
Dec 11, 2005
172
0
17
North Canton, OH
Apr 19, 2006
#1
  • Apr 19, 2006
  • #1
***I already know the stock setup is cold air, but when I bought the car it had a beat up K&N cone clamped right to the MAF next to the alternator, so it needs something else***

I was hoping a few people could post good or bad experiences (relating to fit and quality) of any ebay purchased CAI systems. If you happen to know ebay seller names or the "brand" you bought, that'd be good too. Thanks.
 

Fett

New Member
Nov 2, 2004
766
6
0
Apr 19, 2006
#2
  • Apr 19, 2006
  • #2
I can say this, stay away from those cheap kits on eBay...the ones that sell for $15 with a $45 shipping cost. Pretty much all those cheaps kits suck...as I have seen many of them, including the POS I bought.

My problem was the same as yours, I didn't have the stock setup so I needed something to get my intake out of the engine bay. I bought one of those cheap kits on eBay...against the advice of everyone I know...and it was a waste of money. The biggest problem I see is with the 90 degree bend coming from the throttle body. The angle is such that the corner of the bend hits the shock tower, dents, and eventually works itself loose...allowing in unmetered air.

I eventually went with the stock inlet tube and parts of a kit a friend of mine took off his Mustang. The funny part was he spent like $150 on this well known kit, that consisted of PVC. I literally went to Home Depot and found all the exact peices...for a total of $12.

If you don't have the stock setup, then you could always use the stock accordian tube, MAFS, and a DIY bend to put the filter in the fender well. It is cheap, easy, and fits your needs.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,076
1,659
194
NJ
Apr 19, 2006
#3
  • Apr 19, 2006
  • #3
Just put a stock box back on, with a k&n in it.
Plenty good for your car. And should cost nearly nothing, and possibly free.

If you are hell bent against that, the densecharger by demolet motorsports and the moroso kits are decent and can be found fairly cheap.
 
N

niklid05

New Member
Aug 20, 2004
140
0
0
Kutztown PA 19530
Apr 19, 2006
#4
  • Apr 19, 2006
  • #4
cheapest "cold air" would be making your own out of a few pieces of pvc pipe.
 
S

shifterpilot5.0

New Member
May 20, 2005
49
0
0
Apr 19, 2006
#5
  • Apr 19, 2006
  • #5
I went to home depot and got a rubber 3inch 90 attached it to maf and went through the oval hole in to the fender well, then took a 90 pvc to angle it down and clamped the filter to that. Only cost like $12 and works great!
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Apr 19, 2006
#6
  • Apr 19, 2006
  • #6
i bought an ebay CAI and it rocks

sure its cheap and i had to cut a little of the pipe where it meets the TB.
but nothing even remotely close to justifying spending 100$more for a bbk or other big name one.

i reccomend it, i mean its a metal tube and rubber, there isnt much u can mess up.

heres some pics of mine

View attachment 475389
i think mine was the wickidcarparts seller, i think it was a differnt name when i got mine this past christmas, but its the same picture so i think its the same one.

i think i am happier i bought the cheapy, i mean honestl it doesnt do much, only big change is u can hear air sucking up and maybe a small power increase.

but if i payed 150+ for one it would suck. buying the cheapy is better i think. its the same thing

http://forums.stangnet.com/showthread.php?t=604025
here i made a big topic/article about mine wheni got it.
enjoy!
 

Attachments

  • engine.webp
    29.4 KB · Views: 147

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Apr 19, 2006
#7
  • Apr 19, 2006
  • #7
any pics of these homemade ones
 

GT_Rich

Member
Dec 11, 2005
172
0
17
North Canton, OH
Apr 20, 2006
#8
  • Apr 20, 2006
  • #8
pics

Thanks for the input. Like said above, anyone have any pics of the home made models? I'd like to keep things looking clean.

FoxFan - looks like a good fit to me
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Apr 20, 2006
#9
  • Apr 20, 2006
  • #9
i got a Ebay CAI. it was one of those $20 deals with like $30 shipping. it came with all the hardware, the tubes, hoses and filter...not bad for $50. i specified red filter when i ordered and black hoses. when i got it, blue filter and blue hoses. i emailed the company- no response. i called the company- no response. done this for about 2 weeks and then reported it to ebay and paypal. paypal ended up reimbursing me for the $$ i spent, canceled the sellers account and i got to keep the CAI.

not exactly how i planned for it work out but i got a free CAI out of it. not a bad lookin piece, its polished tubing with soft bends. im not too worried about the fitment. if we have to modify it some, no $ lost.

i would just beware about ordering a 'cheapo' off ebay...
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Apr 20, 2006
#10
  • Apr 20, 2006
  • #10
I have the UPR intake and it looks almost identical to FoxFan's. Filter might be different but for 100 bucks more... I was in the same boat as you without the stock air box and a conical K&N. It really cleans up the engine bay and now i have a good spot for my MSD.
Kevin
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
185
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
634
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
370
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
123
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
492
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?