Cheapest Place to get AFR 165 Heads? Im gonna buy them :D

Starscream88

New Member
Mar 8, 2003
1,277
0
0
Park Ridge NJ
I thought eh whatever,

Time to buy the best lol

Wheres the best place online to get these heads?

Also what EXACTLY will I need to install them?

I know my Cobra Roller rockers wont work :( So ill need new ones,
will 1.7 ratio work with them stud mount?

and I belive I need new Pushrods?

What kinda HP increase will I see over my current combo (In sig) like what RWHP would I be seeing with the AFR's?

There good right ;)?
 
  • Sponsors (?)


try www.flowtechinduction.com , Ed should have them in stock. The cheaper places may not have them in stock and you'll have to wait. You will need pedistal mount heads to use your 1.7 cobra rockers. As for them being the "best", it depends what your goals are. You'' probably get 25-35hp over what you have now. with better power curves. Might as well buy a custom grind cam from Ed too and a valve spring upgrade too.
 
L8 MUSL said:
??????
MM&FF Did a test with these heads on a totally stock 5.0L and saw almost 100hp increase!


Over a GT40 headed 302 with a STOCK cam?? Umm, no..Do your HW buddy :nice: His car as it sits is making around 250rwhp easily, add a set of afr 165 heads (just the heads) and he'll see 275-280rwhp, not 350rwhp using your internet racer math :lol: Like I say, about 30hp increase with better over all power curves.
 
Grn92LX said:
Over a GT40 headed 302 with a STOCK cam?? Umm, no..Do your HW buddy :nice: His car as it sits is making around 250rwhp easily, add a set of afr 165 heads (just the heads) and he'll see 275-280rwhp, not 350rwhp using your internet racer math :lol: Like I say, about 30hp increase with better over all power curves.

I didn't say that HE would see 100hp gains. I was just offering up the info about the test on the heads.
I was very impressed.
I hadn't even pulled out my "internet racer" calculator.
(I only use that on CAI's and underdrive pulleys). :rolleyes:
I do still think he will see more then 30hp over the GT40's but I wasn't going to guess how much.
 
Dude probably didn't realize Starscream already had bigger heads on the car. So vs. stock, upwads to 100 isn't crazy.

Seaking of this, I almost broke my promise to myself and almost started buying parts to build a new engine this week. No no no :nonono: :)
 
a Place out in CA

Apparantly hes doing a bulk purchase,

The more people on the list the less it goes,

hes 3 people away from the next price break he told me yesterday
3 more people and the price will go down another $50 to $100 he said :)

So if anyone wants them GET them!
 
i hope it's not the company that i mention in my sig.. :notnice:
i would highly recomend you go else where.
if i could do it again i would have paid the $1,300 and change some where else. would have more money in my pocket and save myself the fustration. :bang:
i would not spend a penny more at D&D Motorsports in CA. and to think i was ready, right after buying my AFR's, to buy a whole suspenson setup and k-member from them. but that went straight out the window.
due to there :bs: service.

if it is them,all i can do is warn you of the head aches and frustrations of dealing with them. which in the end it's not worth it, for like 2 or 3 hundred dollars less.