• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

check engine light comes on

  • Thread starter Thread starter loudexhaust
  • Start date Start date Jul 10, 2006
L

loudexhaust

New Member
May 13, 2006
99
0
0
Jul 10, 2006
#1
  • Jul 10, 2006
  • #1
Ive got a 91 GT and when my rpms get up before i shift, the check engine light comes on. The car runs great but i noticed that one of the O2 sensors was pinched. Looked like the guy used a vise grip to put it in. Could this be the problem? BTW i hooked up a tester to the computer and it didn't find anything wrong.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 10, 2006
#2
  • Jul 10, 2006
  • #2
Just in case your tester was bad, dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 10, 2006
#3
  • Jul 10, 2006
  • #3
If the CEL illuminated, there should have been a code. DId you get no codes, or a system pass?

Are there any other symptoms?

You can use a DMM to check O2 sensor switching.

Good luck.
 
L

loudexhaust

New Member
May 13, 2006
99
0
0
Jul 10, 2006
#4
  • Jul 10, 2006
  • #4
That actron one in the link is the one i used. I got a couple codes and it passed. Car was running during the test. Ill try again tomorrow.
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Jul 10, 2006
#5
  • Jul 10, 2006
  • #5
Try a KOEO test. Key On Engine Off.

See if anything turns up.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
187
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
306
1996 - 2004 SN95 Mustang -General/Talk- Sep 24, 2026
DadLife0724
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
198
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
498
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Vacuum line question?
  • Mustang Momma
  • Feb 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
255
1996 - 2004 SN95 Mustang -General/Talk- Mar 3, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?