Though i would start a new post to make things more organized...
So i recently installed a Accufab 75mm Throttle Body, Plenum, and JLT CAI and soon after my car threw a check engine light and had an issue of when driving th e car, when i accelerated to around 30-40mph the car would kind of bog and the rpms would drop down to around 1100-1200 and the car wouldn't really accelerate. Or if i accelerate quickly, let off the gas and try to flore it the car won't really accelerate...but on my drive to work this morninig the same issue as i stated in the message right above(It seems like the car just won't go higher then 1000-1500 rpms.) Well driving to work this morining sometimes when i even hit 30, it would seem like the rpms would just die down and drop to 1100 or so and not reaccelerate.
So I had the code scanned and it said it was the throttle position sensor, I went ahead and changed it and the light went off temporarily but came back on this morning. Does anyone have any idea what the issue could be, if the code states it's an issue related to the throttle position sensor, shouldn't have changing it done the trick? or where would the next best place to look be?
Somethings that I'm thinking might be an issue/stood out to me:
--When i reinstalled the throttle body position sensor I may have accidentally moved the throttle body positin slightly...(i may not have, not really sure if i did)
--I noticed after the install when i had the car turned off and was pressing down on the throttle body(spinning the throttle body plate) the throttle body cabel would kind of stutter/bounce back when i released the throttle (i don't remember if this was normal or not, meaning should the throttle body cable just go back smoothly in one motion when releasing the throttle body?). I mean it looks like it's installed properly.
So i recently installed a Accufab 75mm Throttle Body, Plenum, and JLT CAI and soon after my car threw a check engine light and had an issue of when driving th e car, when i accelerated to around 30-40mph the car would kind of bog and the rpms would drop down to around 1100-1200 and the car wouldn't really accelerate. Or if i accelerate quickly, let off the gas and try to flore it the car won't really accelerate...but on my drive to work this morninig the same issue as i stated in the message right above(It seems like the car just won't go higher then 1000-1500 rpms.) Well driving to work this morining sometimes when i even hit 30, it would seem like the rpms would just die down and drop to 1100 or so and not reaccelerate.
So I had the code scanned and it said it was the throttle position sensor, I went ahead and changed it and the light went off temporarily but came back on this morning. Does anyone have any idea what the issue could be, if the code states it's an issue related to the throttle position sensor, shouldn't have changing it done the trick? or where would the next best place to look be?
Somethings that I'm thinking might be an issue/stood out to me:
--When i reinstalled the throttle body position sensor I may have accidentally moved the throttle body positin slightly...(i may not have, not really sure if i did)
--I noticed after the install when i had the car turned off and was pressing down on the throttle body(spinning the throttle body plate) the throttle body cabel would kind of stutter/bounce back when i released the throttle (i don't remember if this was normal or not, meaning should the throttle body cable just go back smoothly in one motion when releasing the throttle body?). I mean it looks like it's installed properly.