• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Check engine light test not working for me

  • Thread starter Thread starter webshot
  • Start date Start date Jul 17, 2008
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Jul 17, 2008
#1
  • Jul 17, 2008
  • #1
The car is a 88GT manual transmission and bone stock. I do have a functioning test engine light. But when I jump the connector with a Paper clip or wire, the check engine light stays on but does nothing. I am sure I have the connector jumped correctly. Does that have to be in neutral or gear (i tried both). Any help greatly appreciated.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Jul 18, 2008
#2
  • Jul 18, 2008
  • #2
no help
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 18, 2008
#3
  • Jul 18, 2008
  • #3
To the best of my knowledge, only Mass Air (Califorina) cars made during the 88 model year had a working CEL.

Here's the alternative method...

Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great. You watch the flashing test lamp or Check Engine Light and count the flashes.

See Troublcodes.net Trouble Codes OBD & OBD2 Trouble Codes and Technical info & Tool Store. By BAT Auto Technical





If your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.



89 through 95 cars have a working Check Engine light. Watch it instead of using a test lamp.



What to expect:
You should get a code 11 (two single flashes in succession). This says that the computer's internal workings are OK, and that the wiring to put the computer into diagnostic mode is good. No code 11 and you have some wiring problems.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

Alternate methods:
For those who are intimidated by all the wires & connections, see Actron® for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see EQUUS DIGITAL FORD CODE READER (3145) – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Jul 18, 2008
#4
  • Jul 18, 2008
  • #4
Thanks Jrichker

But I mean literally not doing anything. WHen I do the jumper method. The CEL just stays on. It doesnt blink or nothing. And I sure I am using the right plug and terminals (I am using you S.I.C post)

What would cause my CEL to not perform as it should when trying to run codes?
 
You must log in or register to reply here.

Similar threads

Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
388
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
178
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
296
1996 - 2004 SN95 Mustang -General/Talk- Sep 24, 2026
DadLife0724
P
Engine Mysterious coolant leak at back of engine
  • palerider94
  • Jan 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
280
Fox 5.0 Mustang Tech Jan 19, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?