checking for vac leaks, any ideas?

D

D347643

Banned

Jan 28, 2003

1,095

0

37

portland, OR

Sep 7, 2004

#1

• Sep 7, 2004

• #1

ever since i installed my stage 1 cam ive been only pulling 14 inch of merc at idle and i cant hear any visable leaks. ive made sure all hoses are tight and used the pliers on all the lines seeing if itd make a dif but i found nothing. engine has less than 10k miles on it and compression is good. anyway, I was thinking about renting a smoke machine and hooking it up to the intake and see if it leaks out, any ideas?

thanks

Drew

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Sep 7, 2004

#2

• Sep 7, 2004

• #2

how much vac should that cam pull? 14" does not sound bad to me......

 

D

D347643

Banned

Jan 28, 2003

1,095

0

37

portland, OR

Sep 7, 2004

#3

• Sep 7, 2004

• #3

i have talked to people who are pulling in the area of 18, plus mine pulls 14 at like 1100 rpm haha i have a high idle. im pretty sure it should be pulling more though.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Sep 8, 2004

#4

• Sep 8, 2004

• #4

Use a squirt can of motor oil to squirt around the mating surfaces of the manifold & TB. The oil will be sucked into the leaking area and the engine will speed up. Avoid using flammable substitues for the oil such as propane or throttle body cleaner. Fire is an excellent hair removal agent and no eyebrows is not cool...

 

D

D347643

Banned

Jan 28, 2003

1,095

0

37

portland, OR

Sep 8, 2004

#5

• Sep 8, 2004

• #5

thanks, anyone else know any tricks?

Drew