chin spoiler installed... uhh.. ok?

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#1

• Dec 23, 2005

• #1

Yeah.. so I go outside today to put the chin spoiler on. Drill in hand, bit set, etc. I look up under the car, and it's already got holes in there. Before you think to yourself "Previous owner had chin spoiler, then removed it," remember I'm the first owner.

I bought the chin spoiler w/ hardware from MT, and they ship it with 3 rivet type things already installed. They lined right up with 3 of the holes that were already there. This held the chin spoiler up, while I simply pushed the supplied push pins up in to the existing holes.

So in conclusion, if you haven't yet installed the Mach 1 chin spoiler, be sure to hit a coyote first, and have your front bumper replaced with one that already has holes for the chin spoiler.

It looks nice.

http://www.sgarlic.com/04stang/IMG_1477.jpg

 

helty

some Ukrainian's enjoying a handjob via my credit

Mar 30, 2005

1,461

1

39

Baltimore, MD

Dec 23, 2005

#2

• Dec 23, 2005

• #2

probably the same front bumper made for a mach1. you lucked out, good for you man

 

BennyBlown2v

New Member

Dec 9, 2004

1,233

1

0

Carmel, INdiana

Dec 23, 2005

#3

• Dec 23, 2005

• #3

Awesome, where did you get your bumper? Is there a different part number perhaps for the one with holes drilled already?

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#4

• Dec 23, 2005

• #4

I just got it from the Ford dealer after I hit the coyote. The body shop there did all the work.. the only difference besides the holes under the thing I noticed from my old bumper is that the license plate looking piece on the front of my original bumper was completely flat, the new one had what looked like a hole template for the license plate screws or something.

Shrug.. fine with me.. fastest chin spoiler install I've ever read about.

 

timeless2

Vi Veri Veni Versum Vicus Vici

Admin Dude

Nov 29, 1999

1,366

202

154

the Shadow Gallery

Dec 23, 2005

#5

• Dec 23, 2005

• #5

Garlic, I don't believe you and now you can't prove the bumper was pre-drilled with a picture.

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#6

• Dec 23, 2005

• #6

Sure I can, I'll go snap one right now.

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#7

• Dec 23, 2005

• #7

Well I guess I can't, but if somebody who lives in Tucson cares to stop by and take a look, I will show you.

 

I

inferno9898

Member

May 17, 2003

249

1

18

Dec 23, 2005

#8

• Dec 23, 2005

• #8

if i remember correctly, there were already a few holes on my bumper when i decided to put the chin spoiler on. they lined up with holes on the spoiler, but i didn't think 3 push rivets were anywhere near enough to hold it, so i drilled about 10 more holes.

 

timeless2

Vi Veri Veni Versum Vicus Vici

Admin Dude

Nov 29, 1999

1,366

202

154

the Shadow Gallery

Dec 23, 2005

#9

• Dec 23, 2005

• #9

No holes existed on the bottom of my '04's bumper when I did this same mod back in October.

 

CRZYHRSGT

New Member

Feb 14, 2004

240

0

0

5.7 miles north of THE Ohio State University

Dec 23, 2005

#10

• Dec 23, 2005

• #10

inferno9898 said:

if i remember correctly, there were already a few holes on my bumper when i decided to put the chin spoiler on. they lined up with holes on the spoiler, but i didn't think 3 push rivets were anywhere near enough to hold it, so i drilled about 10 more holes.

Click to expand...

Mine did too...one in the center and one at each corner. Mine was the original bumper from '02, before the Mach 1s. Go figure!

 

menasci

Member

Aug 17, 2003

640

1

16

Chandler, AZ

Dec 23, 2005

#11

• Dec 23, 2005

• #11

sgarlic said:

I just got it from the Ford dealer after I hit the coyote. The body shop there did all the work.. the only difference besides the holes under the thing I noticed from my old bumper is that the license plate looking piece on the front of my original bumper was completely flat, the new one had what looked like a hole template for the license plate screws or something.

Shrug.. fine with me.. fastest chin spoiler install I've ever read about.

Click to expand...

Hmm....something is fishy.
First of all, all GT bumpers have the place for the license plate. Only the Cobras dont.
Second, my original bumper didn't have holes, and my brand new one didn't either.

 

CRZYHRSGT

New Member

Feb 14, 2004

240

0

0

5.7 miles north of THE Ohio State University

Dec 23, 2005

#12

• Dec 23, 2005

• #12

An added note: they didn't look drilled...they looked like the cover was formed that way from the factory. I'm really getting confused...

 

scupking

Active Member

Sep 18, 2005

1,186

1

36

Enfield, CT

Dec 23, 2005

#13

• Dec 23, 2005

• #13

My 01 doesn't have any holes (it will soon). I tryed putting it on yesterday and had no luck. I have that blue masking tape and it wouldn't keep it on. It just kept falling off.

 

menasci

Member

Aug 17, 2003

640

1

16

Chandler, AZ

Dec 23, 2005

#14

• Dec 23, 2005

• #14

scupking said:

My 01 doesn't have any holes (it will soon). I tryed putting it on yesterday and had no luck. I have that blue masking tape and it wouldn't keep it on. It just kept falling off.

Click to expand...

Take the bumper off and then install the chin spoiler, much easier!
Here's pics of mine just done last week!

 

04GT

New Member

Oct 8, 2003

284

0

0

Southwest Ohio

Dec 23, 2005

#15

• Dec 23, 2005

• #15

OK, now you gotta post before and after 1/4 mile times.

 

ponysarepretty

New Member

Jul 25, 2005

578

0

0

Dec 23, 2005

#16

• Dec 23, 2005

• #16

Probably to streamline production, they made teh Mach1 and GT bumpers the same.

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#17

• Dec 23, 2005

• #17

No, I still have the indentation in the bumper where the license plate shape is, but there are hole templates, where as my original bumper didn't have the hole templates.

I just had all the holes already, I didn't do any drilling, I just used those 3 rivets that come in the chin spoiler, and it held the chin spoiler in the exact right spot while I pushed the plastic push pins up in there.

 

triggz

Founding Member

May 15, 2002

1,218

0

37

Gadsden, AL

Dec 23, 2005

#18

• Dec 23, 2005

• #18

The replacement OEM bumpers are made to fit the v6/gt/mach because they're all the same.

Since yours was replaced by a body shop, the bumper used is probably formed with all necessary mounting points for whatever car it may end up on.

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Dec 23, 2005

#19

• Dec 23, 2005

• #19

Ahh.. interesting. Good to know.. and like I said in my original post, make sure to hit a coyote.

 

menasci

Member

Aug 17, 2003

640

1

16

Chandler, AZ

Dec 23, 2005

#20

• Dec 23, 2005

• #20

sgarlic said:

No, I still have the indentation in the bumper where the license plate shape is, but there are hole templates, where as my original bumper didn't have the hole templates.

I just had all the holes already, I didn't do any drilling, I just used those 3 rivets that come in the chin spoiler, and it held the chin spoiler in the exact right spot while I pushed the plastic push pins up in there.

Click to expand...

I see.
Yeah, mine has the hole templates too.
That's cool that the holes where already there!