Choosing The Right Supercharger

A5literMan · Oct 1, 2015

madspeed said:
superchargers do not make your engine life any more than you beating on it without a proper tune

Where you been hiding?
And Ported cobra intake>Supercharger! Who knew??

Boosted92LX · Oct 1, 2015

Lotsa lolz in here...

a91what · Oct 1, 2015

....corral him? Lol lots of bad advise over there.
Prime example of

Pantera2013 · Oct 1, 2015

well anyway, you can dissagree and hate me all you absolutly want.... View: https://www.youtube.com/watch?v=iejDWSQEsqI

Pantera2013 · Oct 1, 2015

according to this guy you can grind that casting iron extract off and the air will glide over the walls

Pantera2013 · Oct 1, 2015

they say you need a new built motor for a supercharger, idc any ing race/ preformance parts you put on your car will degrade value of car and then mechanics always say it will hurt the life of the engine and tranny. Engineers work and work and work and work and work to make a car possificly to how they want it to get a decent life out of a car. Lol idk but I like original. That's just me. Now steel beaded brake lines are great lol got to have them.

Pantera2013 · Oct 1, 2015

I have worked on a semi and it was running real fine and smooth till he put a different turbo on it and he thought he was going to get more fuel mileage, he ended up not even a year later replacing the cylinder walls because they were even with the block, on some semi's you want them sitting above the block a tad bit. I've seen cars that came out of the factory with a supercharger on it like a Buick with 320k miles on it and it ran fine, then I've seen Hondas head gasket go after a turbo and before they would of been lasting longer positive. That's why if I ever got a super or turbo for my mustang, I would make sure that that engine will hold up and go from the bottom to top

Pantera2013 · Oct 1, 2015

But that's just me. Do wtf you want I ain't here to stop nobody

Pantera2013 · Oct 1, 2015

Why do people wax there car? And why does wax save gas a tad? Bc the air glides over it easier, well that's kinda the same thang your doing with a port job

TOOLOW91 · Oct 2, 2015

Is this even real ? You're really comparing sleeved diesel blocks to what we are doing here ? Pressure is pressure no matter the size of your turbo or blower . So let's get that out of the way . Wax saving gas a tad ? Hold on I have a bridge for sale to . [emoji2]

Now how efficient that big air pump is you decide to use is a different story . The more air that is cramed into that engine needs well you guessed it more fuel . So when things are done properly and the fuel demands are met and the air fuel ratio is corrected to the right area for a shiny new super charger or in your case where a guy added a bigger turbo on a truck where is the foul ? Maybe the belt puts a tad more stress on the crank . That's about it .

Your little semi story - well turbo is free power so putting more stress on an engine that probably made around 28-32 psi from the factory I highly doubt it even with a bigger turbo making more pressure . Now having a program in it that jacked up the fuel way to much now that's something plausible . But what do I know ? I only own a blown mustang and work on diesels for a living .

Also VORTECH FTW. They haven't been around forever for nothing.

@84Ttop @FoxMustangLvr @madspeed need crunch wrap supremes nowwwwwwwww

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

84Ttop · Oct 2, 2015

@TOOLOW91 I'm heading to the taco bell now to sit and wait for them to open. Am crunch wrap here I come!

Your rebuttal was on point there btw

hoopty5.0 · Oct 2, 2015

Pantera2013 said:
according to this guy you can grind that casting iron extract off and the air will glide over the walls

Please understand this, if you get nothing more from this website -

YOU ARE NOT DISAGREEING WITH ME, YOU ARE DISAGREEING WITH THE LAWS OF FLUID DYNAMICS AND PHYSICS.

If I can't get that point to sink in, and you continue to rebut fact with videos from the youtubes, you've got no business working on anything with moving parts.

84Ttop · Oct 2, 2015

ALL HAIL THE ALL MIGHTY B CAM!!!!
@mikestang63 can we get the video?
That is all, carry on

Boosted92LX · Oct 2, 2015

*popcorn*

Boosted92LX · Oct 2, 2015

hoopty5.0 said:
If I can't get that point to sink in, and you continue to rebut fact with videos from the youtubes, you've got no business working on anything with moving parts.

I've come to the conclusion that trying to keep that type of individual from molesting things with moving parts is as hopeless as trying to get "liberals" to stop reproducing..

Boosted92LX · Oct 2, 2015

84Ttop said:
ALL HAIL THE ALL MIGHTY B CAM!!!!
@mikestang63 can we get the video?
That is all, carry on

View: http://m.youtube.com/watch?v=XeOn5FjsYAI

84Ttop · Oct 2, 2015

Boosted92LX said:
View: http://m.youtube.com/watch?v=XeOn5FjsYAI

Thank you sir!

TOOLOW91 · Oct 2, 2015

B cam video makes any day better.

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

mikestang63 · Oct 2, 2015

I heard that Chuck Norris is afraid of only one thing- a B cam.

mikestang63 · Oct 2, 2015

84Ttop said:
ALL HAIL THE ALL MIGHTY B CAM!!!!
@mikestang63 can we get the video?
That is all, carry on

Choosing The Right Supercharger

A5literMan

At least it is lumpy...

Boosted92LX

It's only an inch or two. What's the big deal?

a91what

SendMeUrDataLog

Pantera2013

Member

Pantera2013

Member

Pantera2013

Member

Pantera2013

Member

Pantera2013

Member

Pantera2013

Member

TOOLOW91

If you're the village idiot what's that make me?

84Ttop

They make new pistons every day, so why worry?

hoopty5.0

mechanicus terribilis

84Ttop

They make new pistons every day, so why worry?

Boosted92LX

It's only an inch or two. What's the big deal?

Boosted92LX

It's only an inch or two. What's the big deal?

Boosted92LX

It's only an inch or two. What's the big deal?

84Ttop

They make new pistons every day, so why worry?

TOOLOW91

If you're the village idiot what's that make me?

mikestang63

mikestang63

Similar threads

Choosing The Right Supercharger

At least it is lumpy...

It's only an inch or two. What's the big deal?

SendMeUrDataLog

Member

Member

Member

Member

Member

Member

If you're the village idiot what's that make me?

They make new pistons every day, so why worry?

mechanicus terribilis

They make new pistons every day, so why worry?

It's only an inch or two. What's the big deal?

It's only an inch or two. What's the big deal?

It's only an inch or two. What's the big deal?

They make new pistons every day, so why worry?

If you're the village idiot what's that make me?

Similar threads

Privacy & Transparency

Privacy & Transparency