• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

cigarette lighter help

  • Thread starter Thread starter 91stang50GT
  • Start date Start date Mar 27, 2006
9

91stang50GT

New Member
Nov 1, 2005
57
0
0
Mar 27, 2006
#1
  • Mar 27, 2006
  • #1
when i bought the stang a few weeks ago, many things were not hooked up/wiring harnesses chopped, including the cigarette lighter harness. the harness is completely gone so i took ( i think 18 gauge) wire and ran the positive of the lighter straight to the 12v constant power source in the back of the radio. The lighter works fine now but is this safe to do? Do i need a in-line fuse and if so, about what size?

thanks
 

352Ford2

New Member
Oct 12, 2005
393
0
0
Seattle,WA
Mar 28, 2006
#2
  • Mar 28, 2006
  • #2
No that is not safe to do.

you do need circut protection

run the ground to ground and then run the hot to your fuse box. There is a 15 (or 20 I can't remeber off the top of my head) amp fuse there for it (It feeds your horn as well) put the proper conector on the end that goes into the fuse box properly and then run that wire directly to the lighter socket, no splices. Wireing is really easy and fast to do wrong, but it takes time to do it right.

Wireing your car slopily will hurt deep when you are on the side of the road watching your pride and joy burn to the ground, cause you took a shortcut.

pm me if you have any questions on how to wire something properly.
 

Mustang Yawie

Founding Member
Jul 21, 2002
281
14
28
Rialto CA
Mar 28, 2006
#3
  • Mar 28, 2006
  • #3
Maybe This can Help





 
9

91stang50GT

New Member
Nov 1, 2005
57
0
0
Mar 29, 2006
#4
  • Mar 29, 2006
  • #4
thanks to both of ya.. i wired it up straight to the blue/white wire coming from the fuse box that the cigarette lighter was originally wired to.. i have another wiring question though.. that diagram got me interested in trying to get my horn to work. I have an aftermarket steering wheel (grant) with the horn button in the middle. The two wires are hooked up to the back of the button but nothing happens when pressed, no relay clicking or anything. After looking at the diagram, i traced the Y/LG wire from the relay up to the horn 3-pin contact piece that rubs against the copper plate (behind the steering wheel). I stripped that wire and grounded it and the horn blew. That leaves the problem between that circular copper plate and the horn button itself. Can anyone help?
 
9

91stang50GT

New Member
Nov 1, 2005
57
0
0
Mar 29, 2006
#5
  • Mar 29, 2006
  • #5
by the way the car is an 87 gt with no air bags
 
9

91stang50GT

New Member
Nov 1, 2005
57
0
0
Mar 30, 2006
#6
  • Mar 30, 2006
  • #6
anyone? im thinking of just running the Y/LG wire to a toggle switch under a dash so i have some sort of a horn
 

352Ford2

New Member
Oct 12, 2005
393
0
0
Seattle,WA
Apr 5, 2006
#7
  • Apr 5, 2006
  • #7
sorry didn't see your other post,
If I understand you right, it sounds like your horn swich might not be working, press the horn switch and check for conductivity for Y/LG to ground. If none, then you can start there.
 

soylentgreen

Member
Jun 17, 2003
102
7
18
Apr 5, 2006
#8
  • Apr 5, 2006
  • #8
I imagine the radio circuit has a fuse on it already...so assuming the fuse is matched to the wire you used it should be safe (but probably not ideal).

When I say a fuse is matched to the wire, I mean the fuse rating is not too big to protect 18AWG (knowing the insulation material is important when determing the rating of automotive wire).
 
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
600
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
M
1991 GT cigarette lighter/port not working (horn is working)
  • MartinM
  • Aug 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
346
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2025
MartinM
M
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
195
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
269
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?