Cleaning Cold Air Filter?

[StL3GTJLH]

Hey guys i was just wondering if you guys did anything special when cleaning your cold air filters, should i just spray it off and put it back on after it dry's? Or should i do something else?

 

[CManT1914]

Just spray it out, and get a soft bristle brush to get all the particles off the filter. Make sure it's dry though before you put it back on, that's about it.

 

[dstanggt50]

I just use the k&n recharge kit, use the cleaner, then use the oil (sparingly), I'll let it sit for around 15-30 min, (or whatever the intructions say) then reinstall.

 

[SeventyMach1]

I use the K&N cleaner too. Just spray it on & let it sit for ~10 min. Be sure to get any BIG debri off first with a small brush. I used an old toothbrush, lol. Then I spray it with a garden hose (on REALLY low pressure!) Let that dry. Then put a light coat of K&N oil on there. Let that dry. Install.

 

[StL3GTJLH]

Thanks guys, im going to go buy a K&N kit and use that!

 

[Methodical]

I use the K&N cleaner too. Just spray it on & let it sit for ~10 min. Be sure to get any BIG debri off first with a small brush. I used an old toothbrush, lol. Then I spray it with a garden hose (on REALLY low pressure!) Let that dry. Then put a light coat of K&N oil on there. Let that dry. Install.

Ditto. And try to spray from the inside of the filter out so not to engrane debris into the filter. Peace