• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Cable (3rd one gone bad)

  • Thread starter Thread starter 93 LX
  • Start date Start date Jan 8, 2008

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 8, 2008
#1
  • Jan 8, 2008
  • #1
I have a stock clutch with a Fortes quad and firewall adjustor. The issue is with the cable, the case splits and then the clutch becomes hard to depress. This is the 3rd one that had done this. I have tried aftermarket replacements and this last one was a FORD or so they said it was, wasnt in a FORD package. Any one have any good sugestions? BTW the stock one on the stang broke at the stock quad before the clutch change.

Allen
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 8, 2008
#2
  • Jan 8, 2008
  • #2
Where does the case split?
Is the cable routed properly (big loop)? Is it near the headers?
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Jan 8, 2008
#3
  • Jan 8, 2008
  • #3
Sounds like the cable's getting routed in such a way that it kinks the cable sheath, to me. That and/or being routed too near the exhaust.

Got pics?
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 9, 2008
#4
  • Jan 9, 2008
  • #4
its routed the stock way. I have 2 fox cars with 5 speeds and they are both the same. The case splits at the tranny then works its way towards the front of the car.

No pics sorry.

Allen
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 9, 2008
#5
  • Jan 9, 2008
  • #5
If you disconnect the cable at the fork, does it move smoothly in the sheath? It kinda sounds like perhaps the cable is binding and then putting too much stress on the cable housing.

What is causing this is kind of a mystery though. Just to be really sure (because some cables are installed wrong before we get the cars), does your cable go under the motor mount ear? You don't have LT's?
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jan 9, 2008
#6
  • Jan 9, 2008
  • #6
Where did you purchase the "Ford" cable?
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 9, 2008
#7
  • Jan 9, 2008
  • #7
Alot of those cheapy cables dont have a good sheath inside them. Spend the dough on a good quality adjustable cable. Your t.o.b might be galding up on the bearing support on trans and causing undo stress on the cable also.
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Jan 9, 2008
#8
  • Jan 9, 2008
  • #8
PUNISHER RACING said:
Alot of those cheapy cables dont have a good sheath inside them. Spend the dough on a good quality adjustable cable. Your t.o.b might be galding up on the bearing support on trans and causing undo stress on the cable also.
Click to expand...

Sorry, but "quality" and "adjustible cable" don't belong in the same sentence. There might be an adjustible cable available out there that's not prone to fraying and snapping off at the clutch fork end and/or binding up all the time, but I have yet to hear about one.

The "Ford" cable you speak of was most likely an OEM-style replacement, but not an actual Ford cable. I normally don't give a poo about buying OEM brand-name stuff, but Ford clutch cables are an exception because they do legitimately make their cables RIGHT. There's a Ford "universal" non-adjustible cable available from Maximum Motorsports that costs less than half of what most places want for the Fox-specific cable (it was around $75 shipped, last I checked), and it fits exactly the same (actually, a tad better, IMO) - you just have to re-use your mounting bracket from your old one. It has a quality sheathing on it that does not bind and will not split/crack on you, as long as it's routed properly, and the table is wound/braided in a much more sturdy design than any aftermarket cables.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 9, 2008
#9
  • Jan 9, 2008
  • #9
The problom is the cable sheath. Go to your parts store and have them bring you the 3 they have One is the "premium" one is a baseline and have them get out one for a 94 mustang. Look at the casing. Find the one that looks like a emergancy brake cable. You can see the way it is wound. That is the cable you want. The only differance in any of them is the 94 is a inch or two longer. They have one for a 93 listed also that has a differant part number. Parts stores can be a pain. Sadly you haft to know more than the guy behind the counter.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Jan 9, 2008
#10
  • Jan 9, 2008
  • #10
I kept having trouble until I got rid of my Fortes quadrant.. Went with Maximum Motorsports a few years ago and have not had a single problem.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 9, 2008
#11
  • Jan 9, 2008
  • #11
cevtv said:
I kept having trouble until I got rid of my Fortes quadrant.. Went with Maximum Motorsports a few years ago and have not had a single problem.
Click to expand...

The same issue?

As for the throwout eathing the bearing support, when i did the clutch I bought a steel retainer.

I was thinking the quad too.

Allen
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 9, 2008
#12
  • Jan 9, 2008
  • #12
so will FORD still have a FORD unit?

Allen
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 9, 2008
#13
  • Jan 9, 2008
  • #13
ttop88 said:
The problom is the cable sheath. Go to your parts store and have them bring you the 3 they have One is the "premium" one is a baseline and have them get out one for a 94 mustang. Look at the casing. Find the one that looks like a emergancy brake cable. You can see the way it is wound. That is the cable you want. The only differance in any of them is the 94 is a inch or two longer. They have one for a 93 listed also that has a differant part number. Parts stores can be a pain. Sadly you haft to know more than the guy behind the counter.
Click to expand...

r u saying to get a 94 instead of the 93?
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jan 9, 2008
#14
  • Jan 9, 2008
  • #14
maximum motorsports carries ford cables i believe. I just picked one up from them. Huge difference in how light the clutch is. I would give them a call.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 9, 2008
#15
  • Jan 9, 2008
  • #15
93 LX said:
r u saying to get a 94 instead of the 93?
Click to expand...

Nope. Im just giving you more options at the parts store. That way you can be back on the road quickly. Any of them will work.
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Jan 9, 2008
#16
  • Jan 9, 2008
  • #16
93 LX said:
so will FORD still have a FORD unit?

Allen
Click to expand...

If you want to pay through the nose on a NOS original Ford cable. I think that even the ~ $60 Heavy Duty Ford Racing clutch cable/fork upgrade kit is a made overseas POS. I went through two of them in the past two years, while the prior two cables lasted a good 5 years or so each.

I got the Maximum Motorsports cable last time and it is a much better cable IMO. So far I have about 6 months on it and no problems.
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
890
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
Drivetrain Time to pull and lube the clutch cable
  • LX Dave
  • Dec 21, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
30
Views
2K
Fox 5.0 Mustang Tech Jan 7, 2025
limp
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
912
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
984
Drivetrain Parts Sep 7, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
466
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?