So I put in a new clutch when I put my motor back in. I had to adjust it to within like a quarter inch of the end of the threads(by the clutch fork) to get it to work. Then it was still grinding a little into reverse so I adjusted it to almost all the way. Before i tried it again I lifted up on the pedal to set the self-adjuster or whatever and there was kind of a loud click or pop, not the normal small click, and now the pedal is totally spongy and I can barely get it in gear if at all. Everything looks fine underneath at the bellhousing and at the firewall, and I really cant see anything obviously wrong in the quadrant area either but Im assuming that it has to be something in that area. Is it common for any thing to pop out of place or for the quadrant to snap? Im looking for ideas at this point.